Call Us (717) 738-3080

Fax (717)-738-2132

 

Horst Auction Center
“The Voices Of Experience”

Antique Tool Auction

October 12, 2019

 

  1. 2 – Stanley planes w/ original boxes: #78 rabbet/fillister, NIB (new in box); #4 smooth bench jack, Vg Sold: 80.00
  2. Winchester trade mark #W7 bench jointer plane w/ rosewood handle & knob, Vg (hanging hole in tail) Sold: 65.00
  3. Winchester trade mark #3405-C bench plane (#4 size) w/ mahogany handle & knob, G+-Vg Sold: 35.00
  4. Ohio Tool Co. 15” transitional bench fore plane, Vg-Vg+ Sold: 45.00
  5. Stanley #20 circular/compass plane, late era, Vg+ Sold: 100.00
  6. Stanley #71 brass frame router, G+ Sold: 50.00
  7. 3 – Planes: Millers Falls: #16 block, Vg. (w/ original box); #45 block, Vg (w/ original box); Fulton #3708 BB bench jack, Vg+ Sold: 140.00
  8. 2 – Shelton bench jack planes: #9 NIB (or Vg.+ in original block); #04 w/ pat. #1914609 blade adjustment, G+-Vg Sold: 15.00
  9. Henry G. White, Phila. wooden 4 ½” handled panel fielding/raising plane w/ skew set Butcher plane iron, moving sole plate & adjustable side rail, Vg. Sold: 30.00
  10. A. Howland & Co., NY. (made by convict labor at Auburn State Prison, 1869-74) wooden handled panel fielding/raising plane w/ adjustable sole fence, knick blade & skew set Howland & Co. plane iron, Vg Sold: 60.00
  11. Ohio Tool Co. wooden #114 handled panel fielding/raising plane w/ adjustable sole fence, knick blade & skew  set Ohio Tool Co. 3 ½” plane iron, Vg. Sold: 75.00
  12. 2 – Union Factory, H. Chapin, sash builder’s wooden molding planes: #213 boxwood screw & knob adjustable two-iron sash molding w/ boxwood boxing, Vg; #215 handled fixed two-iron sash molding w/ full boxing, owner marked W. McK. Perry, Vg Sold: 70.00
  13. 2 – Stanley planes, Vg: #78 rabbet/fillister, complete; Handyman #1204H bench jack, some repainted parts, Vg Sold: 55.00
  14. 2 – Stanley planes, “made in England”, NIB: #78 rabbet/fillister, missing fence rod; #4 bench smooth jack Sold: 85.00
  15. Sandusky #120 wooden handled screw arm plow plane, G+-Vg Sold: 55.00
  16. 2 – Wooden sash builder’s two-iron molding planes: P. Chapin maker, Balt. w/ boxwood threads & knobs, Vg. (1 – wedge replacement); T.J. McMaster, Auburn, screw adjustment w/ adjustable sole fence, G+ Sold: 70.00
  17. 11pc. Buck Bros. lathe knife set (medium size) w/ maple turned handles, Vg. Sold: 80.00
  18. Chestnut frame bow/turning saw w/ volute topped chamfer edge frame & bead molded stretcher, turned hardwood turning knobs, Vg Sold: 15.00
  19. Davis & Cook, “Cook’s Patent” 30” brass tipped cherry wood adjustable level, re-finished Vg. (hanger hole) Sold: 12.50
  20. Stratton Bros. 28” brass framed mahogany wood level, re-finished Vg Sold: 25.00
  21. Stanley R&L #30-26” cherry adjustable brass capped level, Vg. Sold: 17.50
  22. Goodell-Pratt Company, #4524-24” brass framed mahogany level, refinished Vg Sold: 22.50
  23. 2 – Homemade mahogany wood measuring devices: 14” or 20” bevel w/ brass hinge bolt & wing-nut. The blade has two drilled pivot-points, Vg.; 13” winged compass/divider w/ wooden pin set wing, brass plate set screw & steel tipped chamfer molded legs, Vg. Sold: 17.50
  24. 4 – Measuring devices: Stanley: #91G double-arm marking gauge, NIB; #49 bit stop gauge, Vg+; General #800-6oz. plumb bob w/ original case, Vg; 12oz. nickel plated plumb bob w/ brass screw cap, Vg Sold: 60.00
  25. 2 – Handled bench jack plane, Vg: Stanley R&L #36 raise handle transitional w/ Eagle strike; Ogontz wooden #5 w/ molded grip, owner initialed T.H.W. Sold: 40.00
  26. 2 – Cooper’s wooden planes: C. Landerson, Chiv plane w/ steel inlay sole plates & 3 - fence  inlay plates. The plane has mounted hand cut tote handle. The plane shows extensive use, G+; D.R. Barton, Rochester, “Sun”/topping plane, Vg Sold: 25.00
  27. 3 – Cooper’s tools: homemade adjustable croze turned 2-grip dovetailed batten/handle & wedge arm cutter; unknown maker brass adjustable croze housing on maple arm (missing fence & stop); flincher frame, missing threaded screw fence, G+ Sold: 30.00
  28. 2 – Wooden screw arm plow planes: Union Factory, H. Chapin #239 ½ handled w/ hardwood knobs & notched stop washers, brass depth adjustment & side stop screw, G+; M. Copeland, w/ 12” threads, boxwood knobs & stop washers, owner signed G.K. Seaman, G-G+ (damage to wedge) Sold: 35.00
  29. 3 – Transitional bench planes, G: Union #26 fore; Stanley R&L:  #29 jointer w/ Eagle strike; #27fore w/ throat Sold: 22.50
  30. 2 – Tools: Lowentraut’s “20th Century” adjustable combination brace/wrench, complete, G; J.G. Howard, brass frame 9” hack saw w/ brass handle/grip, G Sold: 55.00
  31. 5 – Adjustable small wrenches: Billings & Spencer #97 bicycle wrench, Vg; Stillson 8”, Vg; Coe’s Wrench Co. 8 ½”, G; W&B “Railroad Special” 6 ½”, G; Wescott #78-8”, G. Sold: 35.00
  32. 2 – Hand operated kitchen tools: unknown maker hand crank bean huller/slicer marked UH-1,  w/ table clamp, missing slicer head, G; Goodell Co., Atrim, NH. table clamped two-channel cherry pitter w/ hinged press arm, G Sold: 30.00
  33. 2 – Hand operated “What’s it” tools: Gilchrist “Yankee” #7 counter mounted bottle cork extractor w/ hand crank. The frame is ornate floral cast, but has surface pitting & is missing nickel plate, F-G; unknown hand crank table mounted press tool (bean huller??), marked patent pending, G+ Sold: 35.00
  34. Rare, F&F Co., Springfield, O., pat. 7-6-1869 (patented by T. Weaver, Harrisburg, Pa.) , single cob hand corn sheller w/ spring loaded , Vg. Sold: 300.00
  35.  3 – Various “What’s it” tools: Kunkle Valve Co. brass 125lbs. blow down steam valve, like new; “Oddity” screwdriver w/ half round shaft; Winchester Repeating Arms, hand held bullet casting mold, marked 32-165, G Sold: 30.00
  36. 5 – Various tools: unsigned plane iron/chisel honing gauge, G+; Disston, USA veneer saw, Vg; unknown maker saw-setting tool, G+; 2 – T-handle wood threading taps, Vg Sold: 40.00
  37. 2 – Tools: unknown maker, wood turner’s sizing gauge w/ brass slide-over parting tool adjustable gauge, G+; unknown maker, coach builder’s boxing router w/ adjustable brass chisel housing on 14” wide round rod, G+ Sold: 25.00
  38. Cleveland Faucet Co. – Bishop & Babcock Mfg. brass tire pump w/ turn screw valve, G Sold: 22.50
  39. 5 – Graduated sizes of brass propellers for outboard motors, various makers & blade pitch, 6 1/8”- 9”, G-Vg. Sold: 80.00
  40. Match pr. brass kerosene carriage lamps w/ hexagon sloped bottom glass & brass top, conical base & two-tier shield top that has molded ball top. The rear brass hinge door has red bull’s eye lens, only one burner included & missing mounting brackets. *Note- unknown age Sold: 30.0
  41. Brass square top Auto kerosene side driving lantern w/ nickel plated interior, rear & side reflectors, air flow ventilated top. The wick screw is marked Krick & Brocker Brass Company. The glass panels are bevel edged. G+ (no mounting bracket) Sold: 60.00
  42. Copper & brass “Goose-neck” tea kettle. English Empire style (possibly India made) w/ round copper body, cast brass gooseneck spout, brass rim collar, brass loose handle on brass mounts, & copper lid w/ brass acorn knob. Tea kettle is late production piece. Sold: 55.00
  43. 2 – Brass items: Otto Bernz Co., Newark, NJ., pat. 11-15-1910, hand held torch w/ brass narrow reservoir, pump valve in tubular handle, & coil spring around stop valve, restored Vg; American Brass Kettle Mfg. #5 brass bucket w/ wire loose handle, G+ Sold: 30.00
  44. Thomas & Williams Ltd., brass miner’s safety lamp, marked “Schedule R. Cambrian Type” The lamp has no serial numbers, and is either new old stock or late production piece. Excellent condition & all brass appears to be heavy construction. Sold: 60.00
  45. Pr. Cast brass nautical theme candlesticks w/ central small bell that has wheel on outside of stick. The sticks are well made reproductions. Sold: 25.00
  46. Rare, unsigned brass grain core sampler w/ 8 elongated opening on exterior tube & interior revolving tube that has 8 windows & heavy cast brass top. Vg Sold: 65.00
  47. 2 – Brass unsigned, hand blow torches w/ soldering irons, restored Vg: 1. round reservoir w/ expanded base, brass tubular handle w/ air pump, & iron stop valve w/ cast 6-ball tipped handle; 2. round reservoir base w/ expanded base wooden handle on brass mounts, right side tank top air pump & iron stop valve w/ cast 6-ball tipped handle Sold: 25.00
  48. 2 – Brass items: small cast brass ship’s bell on cast brass bracket mount, G; American Brass Kettle Mfg. #2 brass bucket w/ wire swing handle, restored Vg. Sold: 40.00
  49. Early cast brass apple butter/butcher’s ladle. The ladle has spun heavy cast brass kettle w/ brass riveted tapered wrought iron socket & replaced oak handle, restored Vg Sold: 25.00
  50. Unsigned & undated Conestoga wagon jack. The jack has typical rack & pinion w/ wrought iron hand crank. The rack has normal center mounted swivel/cradle, and is encased in hardwood housing. The rack has partial tool decoration under cradle, G (replaced grip on crank) Sold: 70.00
  51. 2 – Braces: Millers Falls #502B right angle drill/brace, G+; John Fray’s patent w/ thumbscrew chuck, rosewood grip & knurl, G+ Sold: 40.00
  52. 2 – Auger bit sets in original oak cases: Keen Kutter #KS9-9pc. set in hinged oak case, G; Irwin 13pc. set in oak hinged case, G+ Sold: 60.00
  53. 3 – Various metal bench jack planes: Winchester Trade Mark 8 ¾” w/ rosewood handle & knob, G; Sargent #409-C, G-G+; Dunlap 9”, G-G+ Sold: 45.00
  54. 2 – Block planes: Record #9 ½ w/ blue paint, Vg; Stanley USA #75 bullnose rabbet block w/ blue paint, Vg Sold: 40.00
  55. 3 – Stanley planes: “sweetheart” #5 ¼ “Junior” jack, G (cracked tote); #9 ¼ block w/ blue paint, G+; #60 ½ low-angle block, G Sold: 55.00
  56. Stanley Bailey #5 bench jack, post WWII, w/ rosewood handle & high knob, Vg Sold: 45.00
  57. 2 – Stanley planes: #278 small rabbet/fillister w/ fence, G; late #12-975 bullnose rabbet block, NIB Sold: 100.00
  58. 4 – Stanley wood chisels: 2 – various “Fat Max” new in package; #16-003-1”, new in package; 2” butt chisel w/ neoprene handle, G Sold: 25.00
  59. 10 – Assorted lathe & firmer chisels, G-Vg: 2 – “dog’s leg”; 5 – lathe gouges; 3 – firmer gouges Sold: 80.00
  60. 3 – Tools: matched pr., G.W. Gregory, Binghamton, NY. handled 1” panel T&G planes, Vg; round head carver’s mallet, Vg Sold: 30.00
  61. 6 – Assorted tools: Stanley Bailey, England #4 jack plane, G+; G.W. Lawrence (attributed to George W. Lawrence, Irishtown, Adams Co., Pa.) wrought iron brush hammer head, F; Asian oak wood spoke shave, Vg; Stanley screwdriver, G; 2 – awls, Vg Sold: 30.00
  62. 2 – Store type tools: no-name red painted #4 balance scales w/ brass trays & assorted weights; counter-mounted cast iron string holder, missing part, F Sold: 20.00
  63. Tray lot 9 – assorted measuring devices, G-V: 3 – 50Ft. tape measures; 2 – metal slide calipers; late trammel point set; etc. Sold: 30.00
  64. 5 – Various tools: French leather work “Goose-neck” hammer, G; Plumb 16oz. claw hammer, Vg; True Temper claw hatchet, Vg; etc. Sold: 30.00
  65. Tray lot drilling devices: Rusby Patent drill, parts missing; 10 – assorted socket head auger drives, Vg; T-handle reamer, Vg; T-handle cheese core sample, G Sold: 30.00
  66. Tray lot 8 – assorted tools: 5 – various cast iron plumb bobs, G; 2 – brass plumb bobs; brass square 7” depth gauge (??) Sold: 40.00
  67. 5 – Various iron spoke shaves: 2 – unsigned duplex/hollow & flat, G+-Vg; MW 12, Vg; 2 – unsigned, G Sold: 40.00
  68. 6 – Assorted micrometers, G-Vg. Makers: Draper; Brownie; Lufkin; Browne & Sharpe; etc. Sold: 25.00
  69. 5 – Assorted tools: Swiss made, long handle carver’s knife, Vg; Plumb lipped dubbing adze head, F-G; hand wrought froe, G; machinist made 6” aluminum frame block plane, Vg; hand held scraper, G Sold: 50.00
  70. Tray lot assorted tools, G: 13pc. “Starter’s” carving knife set; combination tool handle; stitch awl; Stanley #199 utility knife; etc. Sold: 35.00
  71. Tray assorted modern tools, Vg: pr. Stanley #63-404 framing clamps; 2 – brass plumb bobs; 2 – wing dividers (new in package) Sold: 20.00
  72. 4 – Various metal planes: Stanley “Handyman” #5-C jack, Vg+; machinist made 3/8” wooden infill groove plane, G; 2 – block planes: Stanley, G. & no name, Vg Sold: 30.00
  73. Tray lot assorted tools in original box, E: Chatillon’s “Inst. T.” 50lb. spring scale; Diamond #GT-28C nippers; 10pc. assembled set of small wiring pliers Sold: 20.00
  74. 2 – Backsaws: Geo. Bishop & Co. 14” reversible backsaw, G; Disston & Sons #4-25” mitre, Vg Sold: 20.00
  75. 3 – Handsaws: Spear & Jackson, Sheffield, 20” w/ brass split-nut, G; Atkins 26”-8pt., Vg; Disston & Sons, D8-26”, G. Sold: 17.50
  76. 3 – 24” Cast iron levels, F-G: Millers Falls, pat. Dec. 12, 1884; 2 – no-name or Starrett (?) Sold: 45.00
  77. 2 – Axes: no name trade axe, Vg; no name picaroon/axe, G Sold: 45.00
  78. Unsigned broad squaring axe w/ 11 ¼” edge, upper & lower lugs, G Sold: 75.00
  79. W. Dale (attributed to William Dale, working post 1823, in Liberty Twp. Mercer Co. Pa.) carpenter’s adze w/ square full poll, G. Sold: 20.00
  80. Brades, England, #382 carpenter’s adze w/ square full poll, Vg+ Sold: 40.00
  81. 3 – Various tools: US pat. #D302381 (invented by Ron Zabarte, assigned to Vaughan & Bushnell Mfg.) pick, G+; unsigned 3 ¼”W demolition adze, F-G; Dall Bros. pat. 12-30-1913, long handle scraper, G Sold: 30.00
  82. 2 – Wooden tailor’s squares: Lufkin #8142 w/ brass corner brace, Vg; Lufkin “White Cat Brand” w/ advertisement for Kenosha Klosed Krotch Underwear Co. G. Sold: 7.50
  83. Lg. box lot assorted drafting tools (please look for yourself): K&E #3245 lettering set in original box; small drafting tool set; many drafting rules, triangles; trammel points on rails; guides; etc. Sold: 50.00
  84. 7 – Assorted shaves: 3 – various “Bat Wing” handled heel shaves, F-G+; 2 – duplex, hollow-straight shaves, G; 1 – unsigned spoke shave w/ open cast straight handles, G+; etc. Sold: 40.00
  85. 5 – Assorted handled scrapers: Royal Beltz, pat. 2-9-1909, Vg; Rev-O-Noc w/ turned handle, G+; Goodell-Pratt Co. pat. 3-6-1917, w/ turned handle, G+; E.C. Atkins & Co., G; unknown maker w/ saddle screw cap & turned handle, G Sold: 30.00
  86. 2 – Bench mounted machines/tools: North Bros. “Yankee” #1003 bench mount hand operated drill press w/ screw clamp mount, G; Acme #1 stapler (?) Sold: 85.00
  87. Tray lot assorted measuring devices: Acier sliding caliper, G; trammel point set on bar, G; Starrett cast iron plumb bob, NIB; Ruletta Co. octagon brass plumb bob, G; lg. single cast iron trammel point w/ oak rail that is cut with eagle’s head to display as weathervane, G+ Sold: 45.00
  88. 5 – Assorted handled scrapers: S.E. Collins, pat. 5-1-1906, Vg; Hook Scraper Co., pat. #1.670.646 w/ adjustable handle, Vg; The Banke Scraper Co., pat. 2-2-1909, F-G; Stanley adjustable, G; unsigned cast iron, G Sold: 7.50
  89. 5 – Various lg. measuring devices: wooden T-square, G; unsigned, 21” straight leg caliper, Vg; Kreaufer & Co. 18” outside caliper, G-G+; 18” unsigned trammel point set on rail w/ hollow shaft points, G; 13” winged divider, G Sold: 7.50
  90. Tray lot S.B. reference books & try squares: Encyclopedia of American Farm Implements… , 2nd edition, by C.H. Wendel; American Farm Collectibles…, by Russell E. Lewis; Turn of-the-Century Farm & Implements, Peter Henderson & Co.; 4 – various try squares, 6”-15”, F-G+ Sold: 50.00
  91. Tray lot assorted hand tools, G-Vg: 2 – handled scrapers; Eifel pliers-wrench; 2 – leather working pliers; hand wrought tin shears; etc. Sold: 12.50
  92. 5 – Assorted edge tools: Craftsman full hatchet, G; 4” single handled scorp, F; 2 – wooden shaves (1 – hollow & 1 – round), G; unsigned spoke shave, F-G Sold: 17.50
  93. 10 – Assorted wooden common hollow or round molding planes, G. Makers include: Marley, New York; D. Presbrey; Cauldwall; Conway Tool Co; D. Colton; C.S. See; etc. Sold: 20.00
  94. 8 – Assorted wooden side bead molding planes, G-G+. Makers include: 3 - Union Factory, Chapin-Stephens; Shiverick & Malcolm; J. Denison; J. Gibson, Albany; Etc. Sold: 35.00
  95. Goodell-Pratt Co. (w/ Eagle strike) 28” mahogany  brass bound level, G+ Sold: 30.00
  96. 2 – Wooden levels: unsigned mahogany 26” brass bound w/ spring loaded sights, F-G; Stanley #23-24” cherry level, Vg Sold: 10.00
  97. 3 – Stanley #237-24” cast aluminum levels, G Sold: 7.50
  98. 2 – Levels: The Vogel Mfg. Co. pat. 5-13-1919, metal level, G; Stanley #5-20” brass end cherry level, G Sold: 7.50
  99. 5 – Various wooden block planes (2 – hollow & 2 – round),G-G+. Makers include: Sandusky; Cayuga; TD & Co. Sold: 50.00
  100. 3 – Wooden “Bridge builder’s” planes: 2 Union Factory, Chapin-Stephens, 16 ½” long skew rabbet 1 – w/ side mount handle, G; Wm. T. Burdick 1 ¼”X17” raise handle dado, F-G;   Sold: 12.50
  101. 4 – Matched pairs of wooden T&G molding planes, G: 2pr. - Jo. King, Bowery, NY; Ohio Tool Co.; unsigned Sold: 17.50
  102. 11 – Assorted wooden side or other bead molding planes, F-G+. Makers include: J. Denison; Union Factory, Chapin-Stephens; Ohio Tool Co.; Shiverick; etc. Sold: 45.00
  103. 6 – Assorted wooden planes: signed (?) slide arm plow plane w/ wooden stop screws, G+; Union Factory, Chapin-Stephens, dado, G; 4 – common hollow or round, G-Vg: L. Kennedy; Parry; & unsigned Sold: 25.00
  104. * Refinisher’s lot: 13 – Assorted wooden T&G planes, F-G+. Makers include: Sandusky; Ohio Tool Co.; L. Kennedy; etc. Sold: 45.00
  105. 3 – Early handsaws, F-G: Spear & Jackson, #118-26” w/ brass split-nuts; Patterson Bros., New York, 24”; Tillotson w/ C&S Peace & Co. “Lion” brass button, brass split-nuts Sold: 35.00
  106. 2 – Handsaws: E.C. Atkins & Co. #54-26”, Vg; E.C. Atkins, “Reliable” 26”, G Sold: 7.50
  107. *Refinisher’s lot: 3 – Backsaws, P-G: Brittain-Hoole & Co. 16” w/ brass split-nuts; signed (?) #5-14” w/ brass split-nuts; Henry Disston & Sons, 18” Sold: 22.50
  108. 2 – Handsaws w/ combination handles (single blade only); Simonds Saw “Branch House” 18”, G+; Keen Kutter 18”, G+ Sold: 7.50
  109. *Refinisher’s lot: 3 – handsaws, F-G: Joseph Wilson, 14” w/ open grip handle; Paul Smith & Co., Sheffield, 18” w/ brass split-nut; Henry Disston & Sons, 14” backsaw Sold: 7.50
  110. v*Refinisher’s Dream: rare Wheeler, Madden & Clemson “Star” handle on unknown 25” sway back saw. The handle has sawtooth cut-out pattern, but is missing original hardware & is replaced by Disston button, F. (a rare handle form, has chip to rear ear); Disston & Sons, 26” w/ finger-hole grip, G Sold: 10.00
  111. 30 ¾” Plank style bench jointer plane, signed by owner M. Gilbert, Vg (tote is slightly loose) Sold: 15.00
  112. J. Colton, Phila. 28” wooden plank style bench jointer, Vg. Owner signed J. Leinbach. Sold: 15.00
  113. Scioto Works, 22” wooden bench jointer w/ hardwood button, Vg Sold: 12.50
  114. 4 – Wooden planes: raise handle block plane w/ hardwood sole (light partial Lancaster strike), owner strike P.W. Brehm, G+-Vg; 7” E.W. Carpenter, Lancaster, block plane w/ inset throat plate, G+; E. Smith (Rehoboth, MA.) 1 ¾” skew rabbet, G+ (many various owner strikes), G+; H. Hills, Springfield, MS. 1 1/8” dado, Vg Sold: 35.00
  115. 2 – Cooper’s edge tools: D.R. Barton, cooper’s howel chiv w/ set fence that is struck by maker, missing wedge, G+; C. Kidd (believed to be Joshua Kidd, born 1821, in Chester Co., served in Civil War as blacksmith, then later worked in Johnstown until his death due to drowning during the great flood May 31, 1889) hand wrought cooper’s crumming knife w/ turned wood left handle, G+ Sold: 110.00
  116. 3 – Wooden planes: red painted raise handle block w/ steel plated sole, marked JB, G-G+; unsigned horned 9 ½” jack plane w/ Kuno Alsing plane iron w/ adjuster, G+-Vg; W. Williams (New York City) 6 ½” long toothing plane, Vg Sold: 30.00
  117. 2 – Edge tools: unsigned witchet/handle maker’s plane w/ metal threads & bolt plate, G+; late homemade oak D-router w/ metal blade clamp that has wing-nut clamp, Vg Sold: 20.00
  118. 2 – Wooden molding planes: Greenfield Tool Co. screw arm sash molding plane w/ boxwood threads & turned knobs, refinished Vg; John Bell AGT, Phila. moving fillister plane w/ brass side stop & moving sole, Vg Sold: 75.00
  119. Uncommon, Spear & Wood (Chelsea, MA., 2 star rarity), 7/8” handled set side-by-side T&G match plane, Vg. Sold: 65.00
  120. E.W. Carpenter, Lancaster, handled panel grooving plane w/ moving sole, Vg Sold: 35.00
  121. Fine, unsigned handled screw arm plow plane w/ boxwood fence, wedge & threads, turned rosewood round stops & knobs. The plane includes 6 – additional Providence Tool Co. irons. The threads mounts are probably cracked, Vg. The plane has brass depth adjuster & brass side screw stop w/ brass inlay window. Vg Sold: 100.00
  122. 2 – Wooden sash builder’s planes: John Bell, Phila, screw arm adjustable sash molding plane w/ full boxing, walnut threads & fruitwood knobs, Vg; J. Dobie-D. Mallock, Perth, wedge arm sash fillister w/ brass tipped arms, Vg. The plane has dovetailed full boxing. Sold: 30.00
  123. 3 – Wooden joinery planes: John Bell, Phila. two-way ½” match T&G plane, Vg; 2 – handled panel tongue planes w/ steel plated fence (1 – signed Union Factory, H. Chapin, other appears top be from same maker), G+-Vg Sold: 35.00
  124. Fine, E.W. Carpenter, Lancaster, 7/8” X 5/8” Quirk ogee w/ astragal bead, Vg. The plane is marked C.M. Brehm. Sold: 45.00
  125. Casey, Clark & Co., Auburn, NY. handled screw arm plow plane w/ long fruitwood threads, round stops & knobs. The plane has brass adjustment knob & brass side stop knob, refinished Vg Sold: 65.00
  126. Locks, Bolts, Bars & Co. Ltd. Hanley, bookbinders plow plane w/ rock/oak frame & 1 1/8” X 1 1/8” square arms. The plane has center mounted bolt in brass arch frame & tubular receiver, refinished G+. The plane has large turned wood screw handle Sold: 35.00
  127. 4 – Lg. wooden side bead molding planes, Vg: T. Goldsmith (Phila., working 1801-37) ¾” w/ lignum vitae inset biscuit boxing. The plane has 4 – different owner brands or strike; A.B. Seidenstricker, Baltimore, (1855-1866) screw braced lignum vitae filet strip; Moore (William Moore, NYC or Baltimore); Jno. M. Barkley (Jonathan M. Barkley, Baltimore, 1816-1824) w/ owner embossed strike F.C. Sold: 30.00
  128. 2 – Cooper’s shaves: L. & I.J. White, hollow “Keg spoke shave”, w/ replaced turned walnut wood handles, Vg; cooper’s head float w/ iron inlayed throat brace & sole plate. The plane iron is struck J. Fearn Ltd. Sheffield, Vg Sold: 7.50
  129. 2 – Wide P. Chapin, Baltimore, wooden complex molding planes, G-G+:  handled 2 ¼” cabinet cornice ogee (chipped handle ear). The plane has original “SGA $2.00” in ink on tail; 2 ½” ogee w/ bevel Sold: 35.00
  130. 2 – Handled wooden complex molding planes: Aux Mines DeStedes, Paris, 1 ½” two-iron sash or door molding (???) plane, G+-Vg; Wm. Souder, Phila. 2 ¼” Grecian Ogee w/ astragal bead, missing original wedge, G Sold: 17.50
  131. Fine, E.W. Carpenter, Lancaster, 1” X ½” Grecian ogee w/ bevel, refinished Vg. Sold: 55.00
  132. 2 – Wooden complex molding planes, G+ - Vg: Reed, Utica, 1 5/8” Grecian ovolo; John Bell, Phila. 12/8” Grecian Ovolo w/ side bead Sold: 70.00
  133. 5 – Various wooden molding planes: match pr. handled T&G planes, G+; unsigned brass soled & edge dovetail groove plane, G+; Atkinson, Baltimore, altered cut; homemade 3/8” mahogany wood dado plane, G Sold: 40.00
  134. 3 – Drawknives: J. Green (*?) 13” sag back, G+; D. Mix & Co. 10” stop chamfer, Vg; unsigned 6” hand wrought stop chamfer w/ turned walnut handles, Vg Sold: 100.00
  135. 3 – Various edge tools: Plumb shingling full hatchet w/ claw face poll, G; Philadelphia & New York Institutes, boxwood spoke shave, Vg; Millers Falls circular spoke shave, pat. 2-19-1884, Vg Sold: 30.00
  136. 2 – Lg. wooden molding planes: M. Crannel, Albany, 2 ¼” X 15” long, off-set handled rabbet, Vg; homemade handled mixed-hardwood fenced mitre plane w/ L & I.J. White salvaged iron. The plane is made of mahogany & rosewood, Vg Sold: 17.50
  137. Ohio Tool Co. wooden #114-3 ½” panel raising plane w/ moving full wooden sole, iron side mounted depth stop & knick blade, Vg.. Owner strike B. Kemper Sold: 30.00
  138. 8 – Assorted wooden hollow & round planes: pr. Varvill & Sons, Ebor Works, York, #18 w/ T. Underwood, Dealer on tail, Vg; other individual by, G-G+: Butler, Phila.; D. Colton, Phila.; Wm. C. Ross, Baltimore (Vg); Sandusky Tool Co.; B. Frogatt (Birmingham, Eng.); J.T. Brown (Baltimore) Sold: 40.00
  139. Taber Plane Co., New Bedford, Mass. handled screw arm plow plane w/ walnut wood fence, screws, stops & turned knobs, Vg Sold: 30.00
  140. Unsigned, walnut wood handled screw arm plow plane w/ fine molded fence, molded screw arms, notched stops & turned knobs that are brass furrels. The plane is marked G.H. Mohler, Vg. Sold: 120.00
  141. Unsigned, walnut European screw arm plow plane w/ hardwood threads, matched center fence stop & turned knobs. The plane has iron depth gauge w/ brass wing-nut side stop-screw, G+ Sold: 50.00
  142. 4 – J.T. Brown (Baltimore) molding planes: 5/8” side bead, G+; 1 ½” Grecian ovolo, G; 5/8” Grecian ovolo, G+;  ¾” Quirk ogee, G. Sold: 50.00
  143. 4 – P. Chapin, Baltimore, wooden complex molding planes, F-G+: 3 – Grecian ogee w/ bevels (various size); 1 ½” high reveal ogee Sold: 65.00
  144. 2 – Tool references: H.B. The Art of Fine Tools, by Sandor Nagyszalanczy; S.B. The Hand Plane Book, by Garrett Hack Sold: 17.50
  145. 8 – Assorted S.B. tool references & re-printed catalogs. Titles include: 2 – A Guide to Makers of American Planes; Henry Disston & Sons, 1914; 2 – Antique & Collectible Stanley Tools…; Stanley Tool Guide, Form #75; Turning Lathe; Stanley Catalogue #34-1958; etc. Sold: 70.00
  146. 6 – Eric Sloane books: H.B.: Eric Sloane’s America, 1956, w/ dust jacket; I Remember America, 1987, w/ dust jacket; Sketches of America Past, 1986, w/ dust jacket; S.B.: An Age of Barns; Diary of an Early American Boy;  A Museum of Early American Tools Sold: 25.00
  147. Tray tool references & how-to books: H.B.: Making & Using your own Tools…; Machine Tool Operation; The Forgotten Crafts…; Old Ways of Working Wood…; S.B.: Antique Tools…; The Woodwright’s Companion; etc. Sold: 20.00
  148. 8 – Assorted iron block planes, G: Stanley: #110; #130 dbl.-end; 2 - #102; Winchester trademark; Union Mfg.; Fulton Tool Co.; etc. Sold: 35.00
  149. 9 – Assorted firmer chisels & lathe knifes, F-G. Makers include: S. Kerlin; Diamond; Buck Bros.; Spear & Jackson; etc. Sold: 40.00
  150. 4 – Assorted combination saw/knives, F-G+. Makers include: J. Nichols, Phila. w/ brass split-nut; Henry Disston, Phila. w/ walnut chamfered grip & brass split-nuts; & unsigned Sold: 170.00
  151. 4 – Assorted backsaws, G-G+: 3 – Henry Disston & Sons; 1 – Spear & Jackson, Sheffield, 16” w/ brass split-nuts Sold: 85.00
  152. 4 – Assorted combination saw/knives, makers include, F-G+: Reliable Saw Co., Phila. w/ brass split-nut; Lame & McNiece, Phila.; Henry Disston & Sons; H. Disston & Bros., Phila. Sold: 90.00
  153. 8 – Assorted iron block planes, G-Vg: Stanley: #110 w/ nickel plated screw cap; #120; 2 - #103; Union #102; Keen Kutter #K120; Tower & Lyon, Chaplin’s Patent w/ nickel plated saddle cap; Craftsman Sold: 50.00
  154. 7 – Assorted wooden & metal spoke shaves, F-G. Sold: 50.00
  155. Tray lot assorted pliers & wrenches, G: “King Dick” 4 ¼” bicycle adjustable; Mossberg 5” adjustable; Billings & Spencer Co. 4 ¼” bicycle adjustable; Elgin, pat. June 8, 1897, alligator jaw adjustable; etc. Sold: 25.00
  156. 32 – Assorted lathe or carving chisels, made from salvaged files, F-G Sold: 40.00
  157. Tray lot assorted measuring devices: 5 – assorted micrometers: 2 - Starrett & Co; Browne & Sharpe; Lufkin 25’ steel tape w/ brass plumb bob; 2 – K&E tape measures: 50ft. & 100ft.; Lufkin 50ft. “white clad” Sold: 25.00
  158. Tray lot assorted tools: Filling, Phila. 8” stainless steel surgical saw; McNiece, Phila. 7” open grip compass saw; carpet stretcher stick; Woburn Machine Co. #2 depth gauge; etc. Sold: 12.50
  159. 6 – Assorted Stanley block planes, G-Vg: 3 - #110; #120; #9 ½; #118 Sold: 25.00
  160. 4 – Stanley block planes: In original box: #110 w/ nickel plated screw cap, Vg+; #220, Vg; #102, NIB; Stanley R&L #110 w/ embossed star cap, refinished Sold: 80.00
  161. 4 – Various tools: Farrier’s 2” butteris w/ turned knurl, G; Mathieson, Glasgow, 8” brace w/ lever operated chuck, G; 8” wooden brace w/ push-button brass chuck, replaced knurl, G; unsigned ¾” hollow auger, G Sold: 22.50
  162. 5 – Various Stanley block planes, Vg: 3 – in original boxes: 2 - Handyman #H1247 (1 – NIB); “Two-tone” w/ black frame & yellow cap; R&L #102 Sold: 50.00
  163. 4 – Small handsaws: Atkins, 15”-9pt., G; Columbia 11” w/ nib, G; 8” two-sided w/ cherry handle, G; Richardson, Newark, NJ. 12” dbl.-edge/reversible, G Sold: 15.00
  164. 3 – Early backsaws w/ brass split-nuts: J.L. Draper, 12” w/ shielded eagle brass button, F-G; Spear-Jackson & Co. 12” open grip, G+; Jackson 12” w/ shielded eagle brass button, G Sold: 65.00
  165. 2 – Open grip 12” backsaws: Jackson w/ shielded eagle brass button, G+; Smith Seltzer & Co., Phila. w/ shielded eagle button & brass split-nuts, G+ Sold: 50.00
  166. 3 – Various backsaws: Henry Disston & Sons, Phila. 14” w/ closed grip, G+; Jackson, 12” tenon w/ shielded eagle button & open grip, G; 8” unsigned w/ closed grip, G Sold: 40.00
  167. 4 – Various backsaws: Keen Kutter, 14” mitre, G; Wailes, Sheffield, 14”, F-G; Lawrenceburg, 12”, G; Jackson, 14”, G+ Sold: 30.00
  168. 8 – Assorted iron block planes, F+-Vg: Stanley: 2 - #120; Sargent: #5307 w/ knuckle-joint cap; #217; 5 3/8”; Towers & Lyons, Chapin patent w/ saddle cap, refinished G+; Fulton w/ knuckle-joint cap; Hercules, pressed-steel Sold: 45.00
  169. 7 – Assorted firmer chisels or lathe knives, F-Vg. Makers include: Buck Bros.; W. Butcher; Newbould; etc. & socket handle corner chisel Sold: 45.00
  170. 2 – Wooden handled panel raising planes: T. Donoho, Phila. w/ moving sole & side fences, G+; John Bell, Phila. w/ moving sole & side fence, replaced wedge, G Sold: 40.00
  171. Patented dated, E.W. Carpenter, Lancaster, dbl.-wedge 16” fore plane w/ Baldwin, Globe Mfg. Co. iron, refinished G. Sold: 12.50
  172. Tray lot assorted measuring devices: Starrett & Co. micrometer w/ original slide-lid box, G+; machinist gauge w/ iron base; 3 – various combination squares, F-Vg Sold: 40.00
  173. 2 – Tool w/ original boxes: Stanley #116 mitre box, Vg; Henschel-Talens Division #1290 pantograph, 1962, Vg Sold: 7.50
  174. Tray lot assorted measuring devices: 2 – Stanley #88 siding marking gauges, G-Vg; unmarked wooden marking gauge, G; 12” sliding-T bevel square, G; unmarked pair, Stanley level sights, G. Sold: 10.00
  175. 12 – Assorted socket handle firmer & wood chisels, F+-Vg. Makers include: Craftsman; New Have Tool; Douglass Mfg.; L.&I.J. White; etc. Sold: 50.00
  176. Tray lot assorted firmer chisels: 7 – tang handle: Moulder Bros.; W. Butcher; Peugeot; Sargent; demolition chisel w/ solid iron handle, G+ Sold: 45.00
  177. 3 – Various wooden rules: W.A. Work, “Work’s Ladies Tailor System” square, Vg; McCormick-Deering Tractors trade adv. square yardstick, G+; Fowler Maker, Phila. 45” bevel edge rule w/ brass capped end, G+ Sold: 17.50
  178. 4 – Various dip/depth gauge-rules, G-Vg: 2 – brass Turtle’s Standard Gauges: 12”, Vg; 22”, G; Gulf “No-Nox” 12”, Vg; Texaco 12”, 1926, G+ Sold: 25.00
  179. 3 – Wooden rules: 30” 4-tier board foot rule, G; Federal Land Bank, 3-tier International log rule, Vg; Pa. Farmer’s Association, square yardstick, Vg Sold: 7.50
  180. Fine, Preston’s Patent, ornate embossed cast adjustable spoke shave, vg Sold: 65.00
  181. 4 – Various spoke shaves: 2 - Stearns & Co. (1 – pat. 3-27-1900, parts missing); 2 – Stanley: #62 two-way, 1-screw replaced; #54, G. Sold: 35.00
  182. Fine, Preston’s Patent, ornate embossed cast adjustable spoke shave, vg Sold: 65.00
  183. 4 – Coachbuilder’s drawknives: Preston: 2 – patented reed molding, F & Vg; 5/8” left & right edge sash router, G+-Vg; Mathieson, Glasgow, 5/8” left & right edge sash router Sold: 75.00
  184. 4 – Various jointer’s planes: Record, Eng. #044 combination, repaired; Stanley: #130 dbl.-end block, missing knob Vg; 2 - #148-7/8” (missing blades), G.-G+ Sold: 15.00
  185. 3 – Various braces: Stanley: “Bell System” 8” ratchet, G+; #984 right-angle, G+-Vg; Davis Level & Tool Co., pat. 4-17-1883, reversible ratchet, G. Sold: 55.00
  186. 3 – Various Stanley scraper planes, F+-G: #80 box scraper, complete; “sweetheart” #11 adjustable throat, blue paint, complete; #12 adjustable veneer, missing blade Sold: 40.00
  187. 4 – Various spiral operated tools, G-Vg: North Bros. “Yankee”: #100 screwdriver set in original box; 2 - #50 spiral pump drills; Goodell-Pratt Co., pat. 8-3-1895, pump drill Sold: 30.00
  188. 5 – Various planes: Stanley #239 special dado plane, G-G+; 2 – Stanley #75 bullnose block, G-Vg; German (#75) type bullnose block, G.; no-name 3 5/8” block, Vg Sold: 50.00
  189. 7 – Assorted hammers: 3 – various cross-peen, G-Vg; Stanley small rivet, Vg; 2 – ball-peen, G-Vg; dbl.-face upholsterer’s magnetic tip Sold: 50.00
  190. 4 – Various bench planes, G-Vg: Sargent #788; Millers Falls #8-C; 2 – Millers Falls #8 Sold: 85.00
  191. 6 – Assorted draw shaves, F-G+: Stanley *80 box scraper; Bailey’s patent; Seymour Smith; patent 6-19-1866, dbl.-shave hollow & straight; unsigned; heavy 16 ½” straight handle coach builder’s shave w/ Stanley R&L blade Sold: 65.00
  192. 8 – Assorted block planes, G-Vg: Stanley: #220, #18 ¼ knuckle-joint cap, 2 - #103 ; Millers Falls: 7 ¾” dbl.-end, #55, #16; Crescent Mfg. 6 7/8” Sold: 50.00
  193. 4 – Various bench jack planes: Millers Falls #11, G+; DEO #4-C, F+; Stanley #4 (missing chip guard) Vg; Union #4 ½, F (cracked handle) Sold: 55.00
  194. 4 – Various wooden levels: Henry Disston, Keystone Tool, pat. 10-29-1912, 16” cherry, Vg; Stanley R&L #98-12” rosewood brass bound, F-G; Goodell-Pratt #2712-12”, G+; Preston 9 ¾” rosewood w/ full brass cap that has spear-tip view, G-Vg Sold: 30.00
  195. Tray lot assorted measuring devices: matched pr. Stanley trammel points; 3 – various era Stanley brass trammel points; K&E #830041 brass plumb bob w/ sheath, Vg; 2 – Lufkin steel tape measures (50ft. & 100ft.) w/ turned grips, G-Vg; Lufkin 50ft. white tape measure, vg; etc. Sold: 25.00
  196. 6 – Various shaves: 3 – circular spoke shaves, G-Vg; 3 – small cast aluminum, violin maker’s shaves, G+-Vg Sold: 60.00
  197. 3 – Various scraper planes: Stanley: #83, missing depth adjuster, G+; unknown maker (#12 type) veneer scraper, F; Sargent adjustable veneer scraper, missing blade, G+-Vg Sold: 40.00
  198. Tray lot assorted Stanley #55 combination plane parts: 3 – frames & assorted fences Sold: 5.00
  199. 7 – Assorted ratchet braces, F+-G+, various makers & sizes Sold: 45.00
  200. 4 – Assorted sets of Craftsman wrenches, box & open end: 3 – standard & 1 – metric Sold: 22.50
  201. 10 – Assorted early wooden handle screwdrivers, G-Vg: A.W. Payne & Co., Sheffield; Sargent Tool; Bagshaw & Field, Phila. etc. Sold: 40.00
  202. 4 – Assorted wrench sets: MAC standard-metric lock-jaw, Vg; Craftsman standard, duplex open/box; Thorsen standard, duplex open/box; part. Craftsman Sold: 20.00
  203. 4 – Various transitional bench planes: Gage Tool Co.-Scioto Works, 16” fore, Vg; Sargent & Co. #3408 block, G+; Stanley R&L #38 handled block, G-G+; Stanley Bailey #36 handled block, G-G+ Sold: 25.00
  204. Tray lot assorted tools & Collectibles: unsigned piano tuner’s wrench w/ rosewood handle, G+; unknown maker, combination ratchet brace/screwdriver w/ many various heads, G+; “Yankee” #30A spiral screwdriver, G+; unknown maker, pump drill, Vg; etc. Sold: 10.00
  205. 3 – Various planes: 7 ¾” English (Norris Type) handled infill block w/ brass screw cap, G; 7” Sargent & Co. squirrel tail block, missing screw for knob, G+; 6” Meriden Iron Co., pat. 2-10 & 3-10,1885, block, cap is damaged Sold: 40.00
  206. 3 – Various scraper planes, G-G+: Stanley: #83, missing blade; 2 – Sargent VBM, adjustable veneer scrapers, missing blades Sold: 65.00
  207. 2 – Stanley planes: #71 router, missing depth gauge, G+; #78 rabbet fillister, complete G+ Sold: 45.00
  208. 3 – Stanley  planes: Bailey #3-C bench jack, pre-WWII w/ low rosewood knob, G-G+; “Two-Tone” 9” bench jack, G+; #130 dbl.-end block, G Sold: 20.00
  209. 2 – Bench jack planes: Metal Plane Co., Auburn, NY. patented 9”-C jack w/ saddle screw cap, adjustable throat plate & adj. lever, G-G+; 8 ¼” Fulton Tool Co., missing frog, G+ Sold: 55.00
  210. Tray lot assorted edge tools, Vg: no-name brass router, Vg; AMT boxed router set w/ 6 various blade/irons, Vg; boxed pr. AMT instrument maker’s block planes, VG Sold: 17.50
  211. Tray lot assorted leatherworking tools: 11 – graduated Osborne #149 arch/hollow punches (7 – boxed); Keen Kutter combination tool handle, G; 2 – no-name combination tool handles, G-G+ Sold: 55.00
  212. 4 – Stanley planes: #148-7/8” two-way T&G plane, no blades, G; #147-5/8” two-way T&G plane, no blades, G+; 2 -  R&L #18-6 ¼” blocks w/ knuckle-joint cap, G+-Vg Sold: 45.00
  213. Tray lot assorted tools: 4 – graduated Osborne & Co. hollow punches, G+; 3 – General Tool Co. dbl.-end edge rounders, Vg; Woodcraft boxed 3pc. small off-set carving chisel set, vg; 2 – various upholsterer’s tack hammers Sold: 40.00
  214. 6 – Various block planes, G-Vg: Stanley: #19 w/ nickel-plated knuckle-joint cap; #9 ½ w/ maroon paint; #130 dbl.-end; R&L #102; R&L #103; Sargent #307 Sold: 35.00
  215. Stanley #62 low angle 14” bench block/jack plane, handle cracked, G+ Sold: 75.00
  216. 2 - Stanley Bailey #2 small bench jack planes: 1st w/ high rosewood knob & handle, smooth lever, G (small chip off rear right rail); 2nd “sweetheart”, parts missing & lever cap damaged Sold: 120.00
  217. 3 – Early block planes, as is: #1 ½ 6 ¼” L. Bailey w/ embossed Victor screw cap, cracked rail at cap & parts missing; Brattleboro Tool Co. #310-6 ½” w/ adjustable throat plate, G+; 7 5/8” unknown maker w/ hinged open cast cap, blade & adjuster parts missing Sold: 50.00
  218. Miller Falls #65 adjustable veneer scraper plane, Vg Sold: 40.00
  219. 6 – Assorted Stanley measuring devices: boxed #60 doweling jig, Vg; #59 doweling jig, parts missing; 3 – drill bit depth gauges, G-Vg; 9” iron level, P.-F Sold: 10.00
  220. 12 – Assorted stiff-joint outside calipers, F+-Vg: 4”-10” Sold: 25.00
  221. Tray lot 7 – Assorted winged & set-screw calipers & divider/compasses, G-Vg (various makers) Sold: 40.00
  222. 18 – Assorted spring-back calipers & divider, G-Vg: 10- outside; 5 – diver/compass points; 3 – inside (various sizes & makers) Sold: 35.00
  223. 2 – Wooden handled screw arm plow planes, disassembled: A. Howland & Co., NY. rosewood frame w/ fruitwood threads, knobs & stops; Marshall, Glasgow, w/ boxwood threads & knobs, parts missing Sold: 30.00
  224. 2 – Wooden frame braces: Marples – Hermitage, Sheffield, w/ brass spring-collar chuck, brass inlay brace & rosewood knurl, cracked frame, G; Jos. Cooper Patent, by Robt. Marples Hermitage Works, Sheffield, w/ brass pull-pin chuck, ebony capped brass collar knurl w/ lg. Joseph Cooper’s Patent button, G-Vg Sold: 40.00
  225. 6 – Assorted auger bits: graduated set of 4 – hollow augers, G-G+; 2 – spoke pointers (1 – E.C. Stearns), G-Vg Sold: 10.00
  226. 5 – Assorted edge tools: Union Mfg. Co. adjustable pitch scraper, Vg; Bridgeport Hardware Co. solid framed pry-bar/scraper, G+; Preston Patent adjustable spoke shave w/ open cast raise handles, Vg; 2 – various spoke shaves, G-G+ Sold: 17.50
  227. 7 – Assorted hollow augers, G. Sold: 25.00
  228. 4 – Various planes: Meriden Tool Co. patented 6 7/8” block, F-G; Tower & Lyon, NY., Chaplin’s Patent 9” bench jack, G-+; Ohio Tool Co. #04 bench jack w/ Stanley iron, G (cracked tote); Keen Kutter #K4 jack plane w/ Stanley blade, G+ Sold: 110.00
  229. 2 – Wooden braces, parts missing: C&T Pilkington, Sheffield, w/ heavy brass frame bracing, rosewood capped brass based knurl. The brace is missing push button mechanism, G-G+; bit-stock brace w/ brass chuck (missing push-button chuck), rosewood knurl, G Sold: 17.50
  230. 6 – Rosewood & brass handled try squares, F-G.: 1 – w/ level in brass shielded sight (damaged vial); 7”-12” (1 – w/ scribe) Sold: 45.00
  231. 3 – 10” Backsaws: W. Blackford, tenon saw w/ hardwood open grip & brass split-nuts, G+; unsigned mitre saw w/ Warranted Superior eagle button, closed grip & brass split-nuts, G+; Thos. Tillotson, Sheffield, tenon saw w/ open grip & raised cap screws. Saw handle is initialed N.O.P., G. Sold: 40.00
  232. 3 – Modern backsaws, Vg: Spear & Jackson “Cockerill” 12” mitre w/ original sleeve; Nonpareil “Elephant Brand” brass back #120-8” tenon saw, E. (w/ original box & sleeve); Geo. Ibbotson, Sheffield, 6” dovetail w/ turned handle Sold: 35.00
  233. 4 – Various saws: Jennings 18”-11pt. hand saw w/ patent applied for handle, G+; “Made For, Thomas Underwood, Bradford” brass backed 10” tenon w/ open grip handle, chipped ear; Grove & Son, Sheffield, 6” dovetail backsaw w/ open grip handle & brass split-nuts, G; saw pad handle w/ brass collar, missing blade Sold: 15.00
  234. 5 – Assorted “Egg beater” hand drills: Bullock w/ 3 ½” wheel, Vg; O.W.B. w/ 3 ¼” wheel, Vg; unsigned w/ 2 ¼” wheel & rosewood grip, G+; Solar Mfg., Germany, w/ 3 1/8” wheel, G+; Millers Falls #2, G. Sold: 35.00
  235. 9 – Assorted adjustable pliers/wrenches or wrenches: Blackhawk #151 4-head, G; Bemis & Call 10”, F+; 3 – Eifel Flash-wrenches, G-Vg; Elgin, pat. 6-8-1897, alligator jaw, G+; Billings & Spencer, bicycle 6”, G+; Union #1-5 ½”, G; Wakefield Wrench #17-7”, G. Sold: 30.00
  236. 6 – Assorted marking gauges: 3 – rosewood & brass mortise gauges, F-Vg; Patent #10786-9” marking/slitting gauge w/ oval head & rod shaft, Vg; 8” marking gauge w/ oval head, F; 15” iron shaft roller/disc marking gauge, G. Sold: 22.50
  237. Davis Level & Tool Co. pat. 9-17-1867, 12” fancy cast iron adjustable level, G+ Sold: 45.00
  238. Unsigned, machinist made multi-sole hand plane w/ brass frame, mahogany infill grips & 5 – graduated round soles & irons, Vg Sold: 7.50
  239.  Tray lot assorted machinist & drafting tools: Starrett “Last Word” indicator parts; Craftsman SS screw caliper w/ conversion gauge in sheath, E.; Gem indicator in case, complete; Dietzgen drafting trammel in case, complete, Vg Sold: 22.50
  240. Pattern makers multi-sole jack/round plane w/ salvage iron 14” fore plane frame, 8 – replaceable wooden round soles, & matched iron. The plane irons are marked L. & I.J. White, Buffalo, NY Sold: 17.50
  241. Tray lot assorted measuring devices: Browne & Sharpe dial caliper w/ wooden case; LBS micrometer; assorted spring back & stiff-joint outside calipers, G-Vg.; etc. Sold: 15.00
  242. 3 – Assorted socket handle firmer chisels: P.S.W & Co. 3 3/8” slick, missing handle, Vg; P. Merrill (*?) 3” slick, missing handle, G; T.H. Witherby, 1 ½”, G Sold: 140.00
  243. Tray lot assorted tools: 28pc. ¼” lettering set in wooden case, complete; Lufkin #8631-2ft. combination folding level/rule, F+; Interlox #106-6ft. rule, G+; German 6ft. metal tape measure, G; Camillus stag handle pocket knife w/ can opener, G+ Sold: 12.50
  244. 5 – Various planes: Sargent VBM adjustable veneer scraper, missing blade, G+; 4 – assorted block planes, F-G. Makers: Sargent low angle; 2 – saddle caps; no-name Sold: 30.00
  245. 2 – Draw planes: Stanley #11 belt maker’s shave plane, Vg; Sargent VBM (#12 type) veneer scraper, G+ Sold: 70.00
  246. *Restorer’s lot: 3 – various planes, F-G: Stanley: #191 improved rabbet; Stanley R&L #113 circular plane w/ embossed adjuster & screw cap; Craftsman rabbet/fillister Sold: 50.00
  247. 3 – Millers Falls drilling devices: #97 four-gear  breast drill w/ adjustable breast plate, G+; #12 two-gear breast drill, G; off-angle brace, F+ Sold: 45.00
  248. Tray lot assorted drilling devices: Wilson, J. Taylor’s Patent, 12” brace w/ lever operated chuck & steel cap knurl, G+; rare, Bennett & Bloedel Patent 10-10-1905, ratchet brace/drill, missing crank handle, G; assembled James Swan Co. auger bit set in oak case (some altered or replaced bits) Sold: 20.00
  249. 10 – Assorted spiral operated screwdrivers or push drills, G-Vg: 6 – spiral screwdrivers & 4 – push drills Sold: 10.00
  250. 4 – Various coach builder’s edge tools: matched set cast iron T-rabbet & T-circular rabbet (1 – blade); Preston (?) sash builder’s fillister router, missing one fence, G+; ¼” dbl.-edge router w/ wooden grips on cast iron frame, G. Sold: 17.50
  251. Tray lot assorted drilling devices: Goodell-Pratt Co., #385, w/ pat. 8-13-1895 chuck, hand drill w/ aluminum seal case gear box, & chef’s hat handle, G+; Millers Falls Co., pat. 2-18-1890, ratchet brace, missing parts; 9pc. Forstner auger bit set, vg; unknown maker adjustable hollow-bit auger, G Sold: 25.00
  252. 2 – Brass braced wood braces: unsigned 8” w/ brass capped knurl & brass push-button chuck, cracked frame; (?) & Philipps, 8” w/ registered 10-12-1847, brass lever operated chuck. The wooden framed is brass inlay cheek & on shoulder of frame, cap missing from knurl Sold: 5.00
  253. Knowles Patent 19” bench jointer plane w/ 3 rib cast iron sole, dovetailed inset handle, wooden knob & wedge, G+ Sold: 180.00
  254. USMC (United Shoe Machinery Corp.) ZUP-25A block plane. The plane is set corner chisel/cutter plane. It is 17 ¼” long, G. Sold: 7.50
  255. Bailey Tool Co., pat. 3-14-1871, adjustable circular/compass plane, similar to Stanley #13 circular plane, Vg. Sold: 160.00
  256. Tray lot assorted tools: set of 6 – Snap-On, dbl.-end ratchet wrenches; Whitehouse, England,  “Atlas Forge” 8oz. pattern maker’s hammer; 2 – Stanley claw hammers, G & G+ Sold: 50.00
  257. 2 – Planes: Stanley #20 circular/compass plane, G+-Vg; Birmingham Tool Co., 8 ½” jack w/ adjuster lever. The knob is repaired, F+ Sold: 55.00
  258. 3 – Planes: Birmingham (?) low angle rabbet plane w/ wooden grip on solid cast frame handle, high set wooden knob, missing depth stop, G+; Millers Falls #700 block plane, Vg in original box; Stanley #110 block plane, G+-Vg in original box Sold: 10.00
  259. Tray lot assorted tools: 2 – pat. 8-12-1884, tool holders, G & G+; small rosewood handled tool holder w/ tools; 4 – assorted block planes, G Sold: 25.00
  260. 2 – Tools: 20” slitting gauge w/ plane handle grip & rosewood threaded ball stop on fence, missing blade & wedge; Goldsmith, Phila. 3” crown ogee molding plane, F+-G Sold: 70.00
  261. 2 – Planes: Sargent VBM #1068 reversible T&G plane, F+-G (pitting); Bailey’s patent 4-23-1867, circular/compass plane, similar to Stanley #20 adjuster. The plane has wing-nut pitch adjustment knob. The saddle-set stop is not fitting properly, F-G Sold: 50.00
  262. Tray lot assorted bench & carving chisels, G+-Vg Sold: 40.00
  263. 2 – Wooden folding rules: no-name #58-2ft. three-fold w/ arch joint, G+-Vg; unknown 3ft. two-fold “flip-over” yard stick, G Sold: 10.00
  264. 4 – Wooden 2ft. four-fold rules: Stanley: R&L #83C w/ arch-joint, G-G+; #72 square joint, G+; R&L #70 square joint, G-Vg; Rabone & Sons, standard & metric w/ arch joint, G+ Sold: 25.00
  265. 2 – Handsaws: Cincinnati Saw Co. 14” backsaw, G+; Keystone #K-6 “Challenger” 26”-8pt. w/ speedboat graphics, G-G+ Sold: 22.50
  266. 5 – Various wooden side bead molding planes, G-Vg: Baltimore: Kendall; Wm. C. Ross; Atkinson; 2 – restored w/ un-recognizable signature Sold: 22.50
  267. 3 – Wooden molding planes: 2 – Wm Vance (script signature, Baltimore): dado/halving plane, restored Vg; sash coping plane, blade is not correct, G+; E.W. Carpenter, Lancaster, side bead, F (rot near nose of plane) Sold: 7.50
  268. 4 – Philadelphia, wooden molding planes, G+-Vg: John Bell, 1” belection molding, Vg; Butler, 1” quirk w/ side bead, owner branded J. Duncan, Vg; 2 – R.A. Parrish, complex molding, Vg Sold: 65.00
  269. 2 – Wooden complex molding planes: Ohio Tool Co. #60-1 ¼” high reveal Grecian ogee, G+; Way & Sherman, New York, 1 ¾” Grecian ogee w/ bevel, Vg Sold: 35.00
  270. 2 – Stanley Bailey bench planes: “sweetheart” #4-C jack, refinished, Vg; #6 fore plane w/ Record plane iron, G Sold: 70.00
  271. Stanley R&L Bailey #10 carriage maker’s rabbet jack plane, Vg Sold: 140.00
  272. Stanley #72 chamfer plane w/ R&L pat. 4-21-1885, plane iron, Vg Sold: 160.00
  273. “Make-do” Stanley #4-C jack plane, F-G. The plane has a cool brass side plate repair. Evidently the owner wasn’t willing to give up on a favorite plane, when crack happened at throat. The repair makes this plane Sold: 7.50
  274. Stanley Bailey #2 bench smoothing jack, post WWII, G+-Vg Sold: 80.00
  275. Stanley #99 left edge rabbet plane, owner initials scratched on rail, G+ Sold: 45.00
  276. Unsigned combination bevel/try square w/ brass edged rosewood grip, 12” square & 10” bevel w/ brass stop screw, G Sold: 25.00
  277. Fine, 16” brass framed level w/ Lignum vitae infill. The top brass rail is marked A. Masson, and has spear tip accent to vial window. The side view is atop brass reversed-V, Vg. Sold: 80.00
  278. Fine, Disston & Sons, Phila., pat. 10-29-1912, 12” brass bound rosewood level, restored Vg+ Sold: 60.00
  279. Stanley “sweetheart” #98-12” brass bound rosewood level w/ brass framed sights, restored Vg+ Sold: 200.00
  280. E. Preston & Sons #269393-18” mahogany level w/ brass braced corner blocks, & lg. brass framed side sight, restored Vg. Sold: 45.00
  281. 2 – Stanley wooden 24” levels: late #0 cherry level (vertical vial damaged); R&L #103 cherry wood, G Sold: 7.50
  282. C&M 62, Sheffield, brass trammel point set on 24” mahogany rail w/ brass inlay standard/metric rule. The 4” brass octagon housing has 3” steel points & lg. brass threaded knob stop-screws, Vg. Sold: 45.00
  283. Homemade mahogany combination try square/level. The square has 12” X 2 ¾” blade center mortised & rivet pin set into 11” handle w/ brass case level vial. The vial has brass Hessian soldier helmet upper & lower shields, G+. The piece is initialed W.P. Sold: 7.50
  284. Ornate, 9” brass bound ebony (?) level. The level has rounded ends, inlaid brass upper sight w/ off-setting spear tip accents. The inlaid brass side sight is half-round w/ ball top, restored Vg. Sold: 30.00
  285. 2 – Wooden adjustable levels: Davis & Cook, Cook’s Patent #6-30” cherry adjustable level w/ brass capped ends, restored Vg; Stanley R&L #80-26 ¼” mahogany level w/ brass capped ends, F-G Sold: 15.00
  286. Ornate, Masonic inspired trammel point set w/ brass edged ebony (?) 2 1/8” rail. The brass points have wide embossed cast plate housing w/ four-corner clover leaves & central Masonic compass/square motif. The points have 3 ½” steel point & hexagon nut brass threaded stop screws. The rail is 12” long, restored Vg. Sold: 45.00
  287. 2 – Wooden measuring devices: “staircase type” siding marking gauge w/ hand wrought dice-head stop screw in iron plate housing, G+; homemade 14” winged compass/dividers w/ brass ferruled steel tips, G Sold: 10.00
  288. 3 – C.S. Osborne & Co. brass framed rosewood infilled pistol grip slitting gauges, F- restored Vg Sold: 70.00
  289. Stanley, London, brass plane table alidade w/ brass plate base that has hinging parallel rule & 1” diameter compass. The 8” brass scope is mounted on stem w/ 3 ½” round Vernier gauge. The alidade has original oak case w/ brass plate stamped, Stanley #28562, Vg Sold: 35.00
  290. 38” Beam trammel w/ 3 - 1 ¼” brass rectangular housing, brass tuning peg stop screws, 2 – 2 ¼” steel points, 1 – outside caliper. The rail is ¾” x 3/8” mahogany wood, Vg. Sold: 25.00
  291. Waller Tool Co., patent pending, lever operated butt hinge mortise tool. The tool was eventually patented 10-26-1926, by John A. Waller. Vg. Sold: 5.00
  292. 2 – Brass tools: unsigned, 7” heavy framed brass brace w/ high-set brass knurl & solid cast chuck w/ threaded iron stop bolt, Vg; “What’s it” patent applied for, T-handled tool. The tool appears to be rope repair peg or thatch tying tool w/ lever operated cover plate. Vg. Sold: 22.50
  293. 2 – Tools: Hermitage Works, Sheffield, wooden brace w/ brass push-button chuck w/ inlay brass bracing & rosewood knurl, Vg; homemade copper sole D-router w/ 6-multi-wood ply frame, copper & brass blade housing. The router has full copper sole plate, Vg Sold: 25.00
  294. 2 – Stanley brass bound 2ft. four-fold wooden rules: #76 w/ brass arch joint, restored G+; #62 ½ w/ square joint, restored G+ Sold: 10.00
  295. Wooden brass tipped wedge arm sash fillister molding plane: Chapple, Late Wilcock, Manchester, w/ brass mounted side depth stop that has thumbscrew adjuster, restored Vg. The plane has full dovetail boxwood boxing Sold: 30.00
  296. Wooden brass tipped wedge arm sash fillister molding plane: J. Miller, 37 Clayton St., w/ brass side depth stop that has thumbscrew adjuster, restored Vg. Sold: 45.00
  297.  6 – Assorted wooden hollow or round simple molding planes, G-Vg. Makers include: Mutter (George Mutter, England); Wm. C. Ross, Baltimore; Ohio Tool Co.; P. Chapin, Baltimore; J.T. Brown (Baltimore) Sold: 30.00
  298. 2 – Wooden molding planes: D. Malloch, Perth, brass tipped slide-arm plow plane, G+ (missing wedges). The plane has multiple owner strikes; Sargent #707 1/2-3/4” side round, G Sold: 25.00
  299. 3 – Stanley Bailey planes: late #78 rabbet/fillister, complete w/ blue paint, G+-Vg; R&L #23 transitional block, G+; R&L #35 transitional handled jack, G+ Sold: 40.00
  300. Pennell & Miller, 225 Arch St., Phila. 3” moving fillister plane w/ adjustable sole fence & full length side depth fence, restored Vg. Owner branded R.C. Fraim Sold: 22.50
  301. Record #405 combination molding “Multi-plane” in original wooden box-joint constructed tool box. The plane is basically new condition, and has 23 cutters in sleeve Sold: 190.00
  302. Enderes Tool Co., Albert Lea, Minn. #E-351 small bench top anvil, mounted to walnut wood base, Vg+-E. Sold: 75.00
  303. Approx. 20lb. bench top anvil, G (owner struck Bruce Hesley) Sold: 130.00
  304. 2 – Small anvils: unsigned approx. 10lb. drop-forge cast bench anvil, G-G+; J. Deere (John Deere), 1937, trade advertising paper weight anvil, Vg Sold: 100.00
  305. 4 – Small anvils: jeweler’s cast brass miniature anvil, Vg; 2 – Barracks’ ’65, paper weight anvils, Vg; unsigned, cast iron paper weight anvil, G+; Jeweler’s cast iron sm. bench anvil, Vg. Sold: 22.50
  306. 4 – Various tools: 8” Scotch iron brace w/ lever operated chuck & rosewood knurl, F-G; Preston & Sons, 7 ¾” ebony & brass machine level, cracked F+; British Made, 7 ¾ mahogany & brass machine level, G; small crate/grocer’s hammer w/ movable cast iron head on claw blade handle, G Sold: 25.00
  307. 3 – Stanley #92 butt/rabbet marking gauges, F+-Vg Sold: 17.50
  308. 7 – Assorted Stanley 6ft. zig-zag rules, G-Vg: Big 6; #6LG; #106; 2 - #106F; #206; Bell System Sold: 12.50
  309. 7 – Assorted adjustable pliers/wrenches, G-Vg: Elgin, pat. 6-8-1897, alligator jaw; Iver Johnson, 5 ½”; Billings  & Spencer, pat. 2-18-1878; Billings, 6”; Eifel-Flash pliers/wrench; Gordon Automatic 7 ¼”; etc. Sold: 22.50
  310. 2 – Stanley iron #36 levels: #36G-24”, G+; 18”, F-G Sold: 15.00
  311. Davis Level & Tool Co., pat. 9-17-1867, 24” ornate cast iron adjustable level, corner of rails have chip, G Sold: 15.00
  312. 2 – Stanley #36 cast iron levels, Vg: #36G-18”; #36-24” Sold: 35.00
  313. 2 – Levels: Preston & Sons, 18” mahogany level, F-G; unsigned 24” ornate cast iron level, 1-chipped corner, G Sold: 17.50
  314. 2 – Metal planes: Preston patent double-edge side rabbet plane, weld repair to one front corner, otherwise Vg; small Marples Tools groove plane w/ original “Shamrock Brand” box, G Sold: 25.00
  315. 4 – Planes: Sargent VBM #707-7 3/8” small bench jack plane, G (chip to ear of tote); Rapier #14 dbl-end block, repaired cap, in original box; 2 – Stanley #118 pressed-steel low angle block plane, G-G+ Sold: 70.00
  316. 7 – Various Stanley metal handle squares: #1-8” mitre square, Vg; #12-6” try square, Vg; 11 ½” angle square, G; 3 - #12-2” try squares, G-Vg; #14-4” adjustable try square, Vg Sold: 45.00
  317. 3 – Various Stanley #36 iron levels: 6” G+; 9”, nickel plates, G+-Vg; 12”, G (damaged vial) Sold: 7.50
  318. 4 – Various levels: Stanley: #37-6” cast iron, pat. 8-4-1896, Vg; #36-G-12” cast iron, F+-G; #104 cut-down wooden level; Preston & Sons, cut-down wooden level Sold: 30.00
  319. 7 – Assorted iron handle try squares, various sizes, F-G+. Makers include: Disston; Sargent; Richardson Sold: 15.00
  320. 3 – Various Stanley drawknives: #65 chamfer spoke shave, G; #66 universal hand beader, Vg; #67 universal spoke shave, G+-Vg Sold: 90.00
  321. 3 – Various Stanley drawknives: #66 universal hand beader, G+; #68 carriage maker shave w/ V-strike on blade, G; #80 box scraper, G Sold: 22.50
  322. 4 – Various shaves: no-name, Pat. 11-17-1868, low angle shave w/ “batwing” handles, G; no-name, Pat. 4-18-1876, reversible dbl.-blade, G; E.C. Stearns & Co. pat. 3-27-1900, adjustable circular shave, G; Stanley R&L #65 chamfer spoke shave w/ pat. 2-27-1883, G+ Sold: 50.00
  323. 4 – Various Stanley shaves: #67 universal spoke shave, G; #66 universal hand beader (no blades), Vg; reversible two-blade, pat. 4-18-1876, F+-G; “sweetheart” #80 box scraper, G+ Sold: 85.00
  324. 4 – Various drawknives: Stanley (unsigned) reversible dbl.-blade, pat. 4-18-1876, G; Windsor hand beader (second type w/ brass plates), G-G+; unsigned, clamp down two-part handle, damaged F; brass carriage makers two-blade molding router, signed H. Wilford, missing irons, G Sold: 70.00
  325. 2 – Iron bench jointer planes: Winchester trademark, 22”, F (handle & knob are good, but significant rust); Sargent #422-21 ½”, G (numbers scratched on side) Sold: 60.00
  326. Tray lot 9 – Interlox wooden slide-by 6ft. rules: 4 - #106, black lettering, Vg+; 2 - #106, black lettering, G; 2 - #106, red lettering, G-Vg; #106, red lettering, F. Sold: 45.00
  327. 6 – Various planes: Stanley: #248 plow plane, no blades G; 5 – assorted block planes, F-G. Sold: 30.00
  328. 10 -  Assorted push drill, G-Vg: 2 – Millers Falls #100 w/ red handles; Yankee: #45 w/ black handle; #41Y; 5 – various w/ wooden handles Sold: 12.50
  329. 6 – Assorted measuring devices: 3 – wooden pocket levels w/ brass tops, G-Vg. (5 ¾”-8”); Barret (unsigned) dbl.-arm roller gauge; Stanley #88 clapboard marking gauge, F; Stanley bit depth gauge, Vg Sold: 5.00
  330. 7 – Assorted tool holder/handles, F+-Vg: 3 – Excelsior cast iron, pat. 3-19-1867; Buell Bros. w/ rosewood handle; Shantrell’s Patent 3-2-1886, w/ rosewood handle; Stanley “sweetheart”; Millers Falls Sold: 80.00
  331. 3 – Various bench planes: Millers Falls #11, Vg; Sargent #710 auto-adjust w/ square shoulders, G-G+; USA “no-name” 8 ½”, G Sold: 35.00
  332. 2 – Stanley planes: #238 weather stripping plow w/ fence, G+; #239 special purpose dado, G-G+ Sold: 20.00
  333. Sargent #1080 combination molding plane in original tool box. The plane is complete w/ fences, depth gauges, & canvas roll of 20 blades, G+-Vg Sold: 90.00
  334. Tray lot assorted drilling devices: Fray’s #12W wimble brace, G; signed (??) 10” w/ aluminum cased reversible; ¾” hollow auger, G; 12pc. Pugh auger bit set in oak case, G Sold: 22.50
  335. 9 – Assorted Stanley block planes, G-Vg: #102; 5 - #120; 3 - #110 Sold: 50.00
  336. Stanley #45 combination molding plane w/ fence, long rails, & single iron, Vg Sold: 25.00
  337. Early model, Stanley Traut’s Patent #46 or #47 (cast iron frame) combination plane w/ skew set iron, missing parts, G. The plane has floral cast iron frame. Sold: 7.50
  338. 2 – Adjustable veneer scraper planes: Sargent VBM, w/ hardwood sole, Vg; Stanley #12, G Sold: 50.00
  339. 2 – Stanley Bailey aluminum frame bench planes: #A5 jack, w/ rosewood handle & high knob, G-G+; #A4 w/ rosewood handle & high knob, unfortunately holes drilled in rails, otherwise Vg. Sold: 25.00
  340. Early Stanley Bailey #7 bench jointer w/ rosewood handle & low knob, smooth lever cap, G-G+ Sold: 65.00
  341. Stanley #62 low angle jack/block plane, 14”L, F-G (handle & knob are good, but thick rust on sole. Needs extensive cleaning for use) Sold: 95.00
  342. Stanley Bedrock #606-C bench fore plane w/ square top rails, G (chip to ear of handle & surface rust) Sold: 65.00
  343. 4 – Various planes: Stanley: #15-7” block w/ ball grip tote, G-G+; #90 skew rabbet plane w/ through-heel blade clamp & wooden infill, unmarked by Stanley, G+; #118 low angle block w/ pressed steel bed, Vg; Craftsman 6 ¾” low angle block w/ knuckle-joint cap, G+ Sold: 140.00
  344. 2 – Stanley edge tools: #12 ½ adjustable veneer scraper plane w/ rosewood sole, G+-Vg; Bailey pat. 2-19-1901, scraper shave, Vg Sold: 60.00
  345. 2  - Stanley planes: #239 dado plane, Vg; #50 light duty combination beading plane, missing cutters, G Sold: 7.50
  346. 10 – Assorted sliding-T bevel squares, G-Vg: 6 – various Stanley models & sizes; 1 – Universal bevel; 1 – Sohaco; 1 – w/ brass star inlay; etc. Sold: 17.50
  347. 2 – English infill block planes: Preston & Sons, 7 7/8” handled block w/ rosewood inset handle & rosewood infill, G. The plane has brass screw cap, chipped ear on handle, button is missing.; 8” unsigned block w/ 2” high iron frame & rosewood infill, G. (wedge missing, & crack extends down rail at tail) Sold: 25.00
  348. 8 – Assorted rosewood & brass handle try squares, G-Vg: 6 – mitre squares (several Stanley); 2 – early try squares Sold: 20.00
  349. Tray lot 6 - assorted tools, Vg: Sealector, sealing iron, NIB; Lufkin 50ft. cloth tape, in box; Herbrand BF-27 magnetic tip tack hammer; 2 – brass plumb bobs; 12” table sight level w/ ¼ adjustable compass Sold: 25.00
  350. 2 – Brass bound wooden levels: Stratton Bros. 28” mahogany w/ ornamental side sight, damaged horizontal vial; Stanley #96-30” rosewood w/ shielded brass side sight, G+ Sold: 10.00
  351. 2 – Wooden levels: Stanley R&L #30-28” brass tipped adjustable level, G-G+; C.S. Co. 28” brass tipped w/ brass shielded side sight, G Sold: 15.00
  352. 3 – H.B. tool references: Edge of the Anvil, 1977, Jack Andrews; Practical Blacksmithing, 1978, compiled & edited by M.T. Richardson; The Village Blacksmith, 1977, Aldren A Watson Sold: 15.00
  353. Tray lot 8 – assorted catalogs & “how-to” books: hardbound: Pratt & Whitney Small Tools; Sheet Metal Works; softbound: 4 – Starrett catalogs; Atlas, Manual of Lathe Operation…; The Shop Tool Manual Sold: 7.50
  354. 16 Volumes – International Textbook Co. (1930’s era) “How-to” books, most on electrical work Sold: 5.00
  355. Tray lot 11 – Audel’s “How-to” books: 4 vol. set Masons & Builders Guide; 4 vol. set Carpenters & Builders Guide; part set Carpenters & Builders Guide Sold: 7.50
  356. 5 – Assorted catalogs & “how-to” guides: 2 – Lufkin Precision Tools; Van Keuren Co. WK Precision Measuring Tools…catalog #36; Audels Welders Guide; Gurley Engineering Instruments, 1922, Sold: 7.50
  357. 2 – Draw planes: Stanley R&L #11 belt maker’s plane w/ rosewood handle & adjustable throat plate, G+-Vg; Sargent VBM adjustable veneer scraper, G Sold: 45.00
  358. 6 – Assorted Stanley rabbet planes: #180, G; #182, Vg; 4 - #192, F-G Sold: 40.00
  359. 2 – Plow planes: Metallic Plane Co. (made 1867-1880) w/ solid cast frame, wooden grip, screw-tipped screw-in arms, damaged fence; Otis A Smith, Fale’s Patent 4-1-1884, combination plow plane, missing arms & fence, G Sold: 10.00
  360. Tray lot assorted precision measuring devices: 5 – various micrometers: Brown & Sharpe; Starrett; National; Handy; Micro 5” Sine Bar; etc. Sold: 12.50
  361. Tray lot assorted precision tools: 4 – surface milling gauges w/ metal block bases; Dietert, dial horizontal gauge; 2 – drive-pin punch sets; Airway Patent marking gauge Sold: 22.50
  362. Tray lot assorted machinist & precision tools: Starrett #722 digital caliper; Starrett “Last Word”; Jaeger tachometer; etc. Sold: 22.50
  363. 4 – Various measuring devices, Vg-E: unmarked Stanley #77 rosewood & brass mortise gauge w/ pat. 10-22-1872,; Sanderson: 9”-23cm try square; 6”-15cm. try square; Marples #2204-9” try square Sold: 22.50
  364. 18 – Assorted gouge firmer, lathe, bench chisels, G-Vg. Makers include: Spear & Jackson; James Swan; W. Butcher; DeGroote; Keen Kutter; etc. Sold: 180.00
  365. 6 – Assorted wooden marking & mortise gauges, G-Vg: Stanley: 2 - #77 (1 – unmarked); “sweetheart” #265; etc. Sold: 25.00
  366. 4 – Wooden molding planes: J. Schofield, 6 ¾” chamfer plane w/ adjustable depth stop, Vg; W. Hoffmann, New York, skew fielding plane, missing fence, G; unsigned, 10” hardwood (?) coffin shaped block, Vg; 10” cherry raise handle block, Vg Sold: 25.00
  367. 4 – Wooden molding planes: Ogontz Tool Co. 16” fore plane, G+; unsigned rosewood 17” raise handle fore plane, G; unsigned 16 ¼” hollow raise handle fore plane w/ brass button, G-G+; Buffalo Tool Co. 8” block plane, G+ Sold: 7.50
  368. 3 – Wooden molding planes: unsigned 5 ¾” boxwood chamfer block w/ adjustable iron depth stop, G+-Vg; unsigned D-router, G+; J. Denison (Saybrook, Ct.) moving fillister plane w/ brass side depth stop & boxwood filet strip, G+-Vg Sold: 22.50
  369. 6 – Wooden molding planes, G-Vg: Owasco Tool Co. two-iron, 1 ¼” nose molding plane; A. Mathieson & Son, two-iron Grecian ogee w/ bevel; 4 – various side bead molding, makers: 2 - J. Denison; R.W. Hendrickson, Bowery (1859-67, 2-star); Arundel Sold: 30.00
  370. 4 – Wooden complex molding planes: Way & Sherman, N. York, 1 ¾” Grecian ogee, G+; Union Factory, H. Chapin, 1” quirk ogee w/ astragal bead, G; Wm. Ross (Baltimore), ¾” quirk ogee w/ astragal bead (bug damage); Way & Sherman, N. York, 1 ½” ovolo w/ bevel Sold: 75.00
  371. 6 – Assorted complex wooden molding plane (small sizes), G-Vg. Makers include: London; Middleton & Dyson; W. Woodhouse; J.L.W.; Marley, New York; Mutter Sold: 65.00
  372. 5 – Various wooden molding planes, G+-Vg: Mathieson, Edinburgh, two-iron Grecian ogee w/ bevel; H.S. (dated 1851) quarter round w/ side-round; J Denison, snipe-bill; W.E. Bauder, snipe-bill; signed (?) snipe-bill Sold: 65.00
  373. 4 – Various handsaws: Atkins & Co., stair-builder’s saw, Vg.; Disston #68 dovetail w/ turned handle, Vg; unsigned veneer saw, Vg; 7 ½” grafting saw w/ fish-tail open grip handle, Vg Sold: 22.50
  374. W. Tyzack & Sons, & Turner Ltd. #120-8” brass back dovetail saw w/ closed handle, Vg. Sold: 30.00
  375. 2 – Modern brass back mitre saws, Vg+: Sanderson Newbould, 12” Sheffield, England; Spear & Jackson “The Professional” 12” Sold: 35.00
  376. 4 – Handsaws: C.E. Jennings, & Co. 10” tenon backsaw, G; Richardson keyhole w/ fishtail handle, G+; Sargent & Co., New York, 16” mitre backsaw, G+; Fitzwilliams & Co., Sheffield, 14” brass backsaw, G Sold: 25.00
  377. Stanley #96-28” brass bound rosewood & mahogany three-ply wooden level, w/ V-strike, Vg. The homemade pine wood case. Sold: 25.00
  378. 3 – Handsaws: Disston & Sons, 22 ½” carcass saw, G; Spear & Jackson, 18” mitre backsaw w/ brass split-nuts, owner signed M. Thompson; E. Jennings & Co., New York, 20” mitre backsaw, Vg Sold: 15.00
  379. 3 – Handsaws: Disston & Sons, #D-8-28”-6pt. w/ finger hole handle, G+; Disston & Sons #D-23-9pt.; E.C. Atkins 26” w/ floral pressed handle, G Sold: 30.00
  380. 2 – Handsaws: Atkins & Co. 18” flooring repair handsaw, G+; Disston & Sons #71 undercut/trimming saw w/ off-set handle, Vg Sold: 50.00
  381. 3 – Handsaws: Disston & Sons: #7-23 ½”-7pt., Vg; #D8-5 ½ pt., G; Craftsman 26”-10pt., Vg+ Sold: 25.00
  382. 2 – Specialty handsaws, Vg: Geo. Bishop & Co. 18 ½” siding  & flooring saw w/ pivot mounted handle; E.C. Atkins & Co. 18” nail saw w/ multi-blade handle Sold: 25.00
  383. 2 – Multi-blade handsaws: Disston & Sons, Phila. two-way handle w/ 12” double-edge blade & 18” flooring & siding blade, Vg; Disston & Sons, two-way handle w/ double edge blade, compass/carcass blade, & keyhole blade, G Sold: 10.00
  384. 3 – Various handsaws: 18” flooring & siding saw, G; Geo. Bishop & Co. 20” hacksaw blade in multi-blade handle, G-G+; Pennsylvania Saw Corp. #78-16” backsaw, G+ Sold: 17.50
  385. 3 – Handsaws: Atkins #65-8pt., Vg; Simonds Saw, 26”, G; Woodrough & Clemson #7-6pt. G+ Sold: 7.50
  386. 2 – Handsaws: Stanley “sweetheart” Four-Square “Household” 24”-8pt. G-G+; Disston & Sons 26 ¼” w/ improved “mid-century modern” aluminum handle, G Sold: 75.00
  387. 4 – Assorted ratchets braces, G-Vg: Davis Level & Tool Co.; Millers Falls #32; Wilcox Co; Stanley #923 Sold: 15.00
  388. *Restorer’s Lot: 2 – English brass framed braces, as is F-F+: William Marples Mfg. “The Ultimatum Brass framed”, cracked grip; Bennett Burley, missing knurl & damaged infill; spare rosewood knurl from Wm. Bee brace Sold: 17.50
  389. 4 – Various scrapers, G-Vg: Stanley: #82; #283; Union Mfg. Co. adjustable; Merit Tools, universal adjustable Sold: 17.50
  390. 4 –Various T-handle auger handles (1 – ratchet movement), all unsigned G-Vg: 2 – Roger’s #3; 1 – Pratt’s Patent; 1 – Gunn’s ratchet Sold: 25.00
  391. 3 – Various planes: Stanley: #12 ½ adjustable veneer scraper w/ hardwood sole, G+; “What’s it” salvaged corrugated jack (check it out. Loads of work to create out of spare salvaged parts, but why?); Stanley Defiance #1244 jack, G+ Sold: 17.50
  392. 2 – Bench jointer planes: Sargent VBM #418-C, G-G+; Stanley Bailey #7, WWII w/ resin adjuster knob, G-G+ Sold: 85.00
  393. 3 – Various scrapers: Sargent VBM #15, repaired; Dikeman Mfg. Co., pat. 11-06-1906, universal adjustable joint, Vg; no-name, pat. 9-29-1903, adjustable handle scraper, G+ Sold: 7.50
  394. 3 – Transitional bench planes: Standard Rule Co. #26 fore plane w/ rosewood raise handle & lg. brass adjuster knob, resurfaced Vg; Birmingham Plane Mfg. Co. 15” fore plane w/ adjuster lever, refinished Vg; Tower & Lyons, Chaplin’s Patent 5-7-1872, raise handled block, G+-Vg Sold: 160.00
  395. 4 – Various planes: Sargent 7 ¼” jack, F+; Tower & Lyons, Chaplin’s Pat. 9”-C jack, F+; 2 – Sargent low angle block planes w/ knuckle-joint caps, G+-Vg Sold: 40.00
  396. 4 – Various scrapers: Stearns & Co. w/ universal adjustable joint handle, G; Stanley #283 w/ adjustable handle, Vg; no-name pat. 9-29-1903, w/ adjustable handle, G+-Vg; Stanley fixed angle box scraper, G Sold: 22.50
  397. 3 – Stanley planes: #140 rabbet/block w/ removable side rail, replace blade, G+; #95 edge trimming block, F+-G; #110 block w/ blue painted deck & nickel plated cap, Vg Sold: 95.00
  398. 3 – Various planes: 2 – Stanley #39 dado planes, missing blades: ¼” Vg; ¾”, F-F+; Alumo 1A plow w/ moving side rail Sold: 70.00
  399. 3 – Transitional bench planes: Stanley #127 fore w/ adjuster lever, G; Standard Rule Co. #29-20” raise handle fore plane w/ glue applied sole, G; Tower & Lyon, Chaplin’s Patent 5-7-1872, 24” jointer, G-G+ Sold: 40.00
  400. 4 – Stanley planes: #11 belt maker’s draw plane, chip at edge of throat, G-G+; #60 low angle block w/ knuckle-joint cap, G+; 2 - #9 ¼ block planes (1-maroon paint & 1-black paint), G+-Vg Sold: 30.00
  401. 3 – Various planes: unsigned 3 ½” bullnose, G+; 5 ½” Metallic Plane Co. block plane, G; 7” block w/ Buck Bros. iron & mahogany wedge w/ palm guard, lg. chip at throat, G Sold: 30.00
  402. 5 – Various block planes: Sargent 7” rabbet block, G-G+; Sargent #580 w/ nickel plated knuckle-joint cap, G+-Vg; Sargent 6 ¾” low angle block w/ knuckle-joint cap, Vg; 2 – Stanley #9 ½ blocks, G-Vg Sold: 75.00
  403. 3 – Stanley planes: #2 bench jack smooth plane, cracked rail, but good parts; #118 pressed gun metal block plane, Vg; #191 improved rabbet, missing depth stop, G-Vg Sold: 30.00
  404. 2 – Early metal frame braces, unknown makers: 1st lg. 10” heavy frame brace w/ spring steel chuck in octagon socket & high rosewood knurl, G; 2nd 10” light frame brace w/ mortised & tenon mounted deep wedge socket chuck. The brace has rosewood grip & knurl on brass hub, Vg Sold: 25.00
  405. Goodell-Pratt Co. pump drill w/ three jaw chuck, rosewood pump handle & brass fly-weight on rod shaft, Vg Sold: 20.00
  406. 2 – Drilling devices: Millers Falls 10” drill-brace w/ removable hand crank ratchet gear, G; unsigned & non patent number, right-angle corner brace w/ collar top clamp on two-jaw chuck, rosewood handle & knob, Vg Sold: 130.00
  407. 3 – Drilling devices: North Bros. “Yankee” #100 drill/driver w/ original oak case, G+; A.H. Reid, Phila. Archimedes driver w/ rosewood knurl, G+-Vg; Millers Falls #51 sill borer attachment, G+Vg Sold: 7.50
  408. 4 – Various drilling devices: unsigned pump drill w/ walnut turned pump handle, 2 ½” brass fly-wheel; 3 – various Asian spin drills, Vg Sold: 17.50
  409. 5 – Various drilling devices, G-Vg: Goodell-Pratt: 3-#5 ½ hand drills; “Yankee” #1530 hand drill; Stanley “sweetheart” #741 breast drill Sold: 30.00
  410. 2 – Wooden braces w/ brass bracing: unsigned 8” w/ brass push-button chuck, & rosewood knurl (missing cap), G; E. Windle & Co., Sheffield, 8” w/ brass chuck (missing push button) & rosewood knurl w/ eagle on stem cap, G Sold: 10.00
  411. Jennings & Co., New York, 24” ornate open work cast iron level, G Sold: 17.50
  412. 3 – Wooden levels: Preston & Sons, rosewood 18” w/ brass corner ends & lg. framed side view, G; W. Johnson, Newark, NJ. 28” cherry, Vg; W. Johnson, Newark, NJ. 26” rosewood, G+ Sold: 17.50
  413. 2 – Late, levels, G+-Vg: Stanley #36-24” iron frame level, some rust on 1 – end; Pro Smart Level battery operated digital level Sold: 5.00
  414. 2 – Early backsaws w/ brass split-nuts: rare, Vance & Landis, Phila. (1858-1870) 8” dovetail w/ closed grip, G+; Spear & Jackson, Sheffield 14” mitre saw, G+ Sold: 85.00
  415. Sanderson & Newbould “Pax” 8” brass backed dovetail saw w/ open grip handle, Vg+ Sold::
  416. 3 – Handsaws: Disston & Sons, #4-14” mitre backsaw, Vg; Sargent & Co, “Jefferson” #41-12” backsaw, G-G+; Metropolitan Hardware & Co. 13 ½” handsaw, Vg Sold: 35.00
  417. 5 – Various handsaws: 16” handsaw w/ Warranted Superior button, F+; 3 – various key-hole saws; cooper’s riddle saw w/ 6 teeth, Vg Sold: 30.00
  418. Stanley chute plane & board set: #51 chute plane, post WWII w/ 1910-12 arch strike on blade & Teflon adjuster knob, Vg; #52 chute board, missing set screw on adjustable mitre. Both Vg. Sold: 160.00
  419. The Standard Rule Co. pat. 10-30-1882, 23 ¼” heavy frame jointer, G+-Vg Sold: 170.00
  420. Stanley bench mount #400 mitre vise, Vg Sold: 30.00
  421. Seymour & Whitlock, Newark, NJ., patent extended 8-17-1872, lever operated mitre cutter on wooden frame, G+ Sold: 17.50
  422. H.C. Marsh, bench mount combination mitre vise/box, G Sold: 45.00
  423. Seymour & Whitlock, mitre cutter on oak frame w/ replaced wrought iron handle, G+ Sold: 15.00
  424. 3 – Wooden levels: Stanley #35-42” cherry wood mason’s plumb bob level, G; C.S. Co. 41 ½” cherry wood mason’s plumb bob level, F+-G; Akron Eclipse spirit level #28-41 ¾” mahogany, Vg. Sold: 12.50
  425. 2 – Cast iron tools: Olney & Warrin, lever operated mitre cutter, metal housing only, G; North Bros. Mfg. Co., Phila. patent applied for, three-leg Christmas tree stand w/ three-jaw turn-screw clamp, G+ Sold: 7.50
  426. 2 – Wooden plank style bench jointer planes: Copeland & Co. 22” w/ through tail blade clamp system, Vg. The blade is a Baldwin Tool Co. iron w/ brass T-pod riveted to underside of iron; J. Maxwell, 22” (embossed strike, unknown), C+ Sold: 17.50
  427. 2 – Wooden plank style bench jointer planes: unsigned 24” w/ Mottram 2 ½” wide iron, Vg; Israel White, Phila. 22 ½” w/ W. Butcher iron, G Sold: 20.00
  428. 2 – Transitional bench jointer planes: Sargent VBM #3424, G+; Stanley R&L #132-26” w/ Liberty Bell screw cap, chipped ear from handle, G-G+ Sold: 40.00
  429. 2 – Gage Tool Co. transitional bench jointer planes, G-G+: #G30-22”, chip from ear of handle; #18-24”, chip from ear of handle Sold: 12.50
  430. 2 – Gage Tool Co. transitional bench planes: Stanley Gage #G27 ½ - 15” self-adjusting, G+; #G36-10 ½” raise handle, G+-Vg Sold: 65.00
  431. 4 – Gage Tool Co. transitional bench planes, G-Vg: 2 - #4-10” raise-handle; #1-8” raise handle, replaced walnut handle; #8-12” Sold: 25.00
  432. 5 – Various transitional bench block planes, G-Vg: 3 - Sargent & Co: #3407; #3413; Union Pat. 8 ¼” Sold: 30.00
  433. 3 – Wooden handled bench planes: homemade 1 ¾” X 17 ½” Bubinga raise handle rabbet, cracked softwood handle, G+-Vg; E * L (homemade) 15 ½” raise handle rosewood handle, Vg; unsigned 9 ¾” raise handle block w/ Buck Bros. iron, the nose is marked H.C. Dexter Sold: 15.00
  434. 3 – Transitional bench planes: 2 - Sargent & Co. #3412 handled blocks, G; Stanley #127 w/ lever adjuster &  Liberty Bell cap, G. Sold: 30.00
  435. 4 – Wooden molding planes: homemade 3 ¼” bullnose block, marked on tail R. Mayor, G+-Vg; New York Tool Co. 12” jack, G+; 2 – horned block planes: Ott, Olmia, Vg; German #5 X 1 ½”, G Sold: 70.00
  436. C. Nurse & Co. Ltd., London, wooden screw arm plow plane w/ boxwood thread, knobs & washer stops. The plane has depth stop w/ brass turn knob & brass tombstone side window, Vg Sold: 35.00
  437. A. Howland & Co. #94  handled screw arm plow plane w/ boxwood threads, knobs & washer stops, Vg Sold: 35.00
  438. Set of 3 – Homemade wooden ogee w/ bevel molding planes, Vg. The planes all use the same iron & wedge. The planes are a 6 ½” standard flat mold & 2 – compass circular plane w/ various gradients Sold: 17.50
  439. Tray lot 5 – various tools: 2 – tanner’s walnut handled hide scrapers (only 1 blade); cooper’s straight pail shave w/ 4” wide iron & brass throat sole plate, Vg; T.M. adjustable spoke shave w/ brass adjuster knobs, G; unsigned wooden spoke shave, G Sold: 22.50
  440. 2 – A. Mathieson & Son, #7 wooden screw arm plow planes w/ boxwood threads, knobs & notched wafer stops. Both planes have side mounted brass depth stops w/ brass adjustment screws, G-Vg (1 –missing iron & wedge) Sold: 40.00
  441. Collins & Wallis (unfound) brass tipped wedge arm plow plane w/ brass screw depth adjuster & side screw in oval side window, replaced wedge & no irons Vg. The arms are rule calibrated. Sold: 35.00
  442. 2 – Wooden brass tipped slide-arm sash fillister planes: unsigned w/ warranted strike, the plane has multiple owner strikes. The plane has side mounted brass depth fence w/ iron adjuster screw, wedge kept knick iron, Vg; D. Malloch, Perth, w/ full dovetail boxing, brass side mounted depth stop that has brass adj. screw, missing knick iron, G-G+ Sold: 30.00
  443. 2 – Wooden plow planes: A. Mathieson, Glasgow, handle brass tipped wedge-arm, missing iron & wedge, Vg; Bewley Warranted (New York plane maker) screw arm plow, G. The plane has U.S. branded on nose & 1 – side of plane. The plane is missing one screw knob. Sold: 17.50
  444. 4 – Various tools: E. Preston & Sons, 18” mahogany level w/ brass tipped corners & lg. brass framed side window, Vg; Stanley “sweetheart” #193 brass bound mahogany level, refinished G+-Vg; 2 – wooden screw clamps branded PP, E. Sold: 40.00
  445. 4 – Drawknives: Keen Kutter, 8”, Vg; homemade mahogany scraper shave, marked G.W. Carman, Vg; Hermitage, Sheffield spoke shave w/ brass sole plate, G+; unsigned wooden spoke shave, G Sold: 90.00
  446. 3 – Various edge tools: signed (??) cooper’s band nailing adze w/ tail & 2-side nail clip pullers, G; 2 – shingling half hatchets: True Temper & unsigned Sold: 22.50
  447. 4 – Various primitive/tools: hand wrought field tiling shovel w/ socket for missing handle, G; C.W. Curtis (?), 8” cleaver, G; hand wrought Farrier’s froe, made from file; T-handle tapered reamer, Vg Sold: 30.00
  448. Tray lot 6 – assorted tools: Greaves & Sons, Sheffield, wooden brace w/ brass bracing. The brace has push-button chuck & rosewood knurl, G; homemade stair builder’s saw, G; small T-handle reamer, G; Stanley socket handle firmer chisel, G+; 2 – wooden marking gauges, G-G+ Sold: 25.00
  449. 5 – Various cooper’s tools: 2 – croze planes, F-G; hand wrought 8” wheel traveler, F; Factory made 8” wheel traveler w/ 4 leg braces, G+; 2 ¾” bung borer, G Sold: 25.00
  450. Tray lot assorted primitives: G & J.W. Hawksley, Sheffield, brass embossed powder flask, Vg; Eck Bros., New Haven, brass keg tap, Vg; H.A. Hannum & Co. “The Gem” fabric pinking roller/cutter machine, Vg; patent 10-31-1922, #3 brass hot comb w/ wire heat defusing handle, Vg. Sold: 17.50
  451. 5 – Various wooden marking gauges: Wm. Marples, Hibernia Works, brass faced rosewood mortise gauge w/ full faced oval fence, G+-Vg; Disston & Morss, Phila. rosewood & brass mortise gauge, G+; 3 – common marking gauges (1 – Stanley), G Sold: 30.00
  452. Millers Falls 6pc. carving chisel set, NIB Sold: 45.00
  453. 2  - Record, England, planes, Vg+: #07 bench jointer; #60 ½ low angle block Sold: 90.00
  454. Rare, Stanley #9 cabinet maker’s mitre/block plane w/ rosewood knob tail, Vg. Sold: 325.00
  455. Stanley #45 combination molding plane in original oak slide-lid box, G Sold: 80.00
  456. 2 – Stanley planes: # 278 rabbet & fillister plane w/ fence, heavy rust on sole, G; #75 rabbet block, NIB Sold: 80.00
  457. 6 – Various planes, G-Vg: 4 – Wooden side bead or nose molding planes, G+-Vg: Greenfield Tool Co; Sargent & Co. two-iron; (?), Phila. w/ over-brand P.R. Latch; J. Colton, Phila.; 2 – Stanley transitional block plane: 8” block; #185-10” handled block Sold: 25.00
  458. 6 – Wooden molding planes, F-G+: I. Cox, Grecian ogee w/ astragal bead; J.T. Brown (Baltimore) quirk ogee w/ astragal bead; Mathieson & Son, #178 quarter round w/ fence; John Green, ogee; Stothert, Bath, Grecian ogee w/ astragal bead; N. Schauer (Eastern Pa.) moving fillister Sold: 22.50
  459. 2 – Various tools: Stanley “sweetheart” #80 box scraper, Vg; Bemis & Call, H&T Co., adjustable dbl.-jaw wrench, G+ Sold: 25.00
  460. Tray lot machinist tools: Starrett & Co. 12 ¼” machinist level w/ mahogany case, Vg+; Starrett universal dial indicator w/ case & box, G+; set of 7 – K.R. Wilson, precision round set in wooden case, F-G Sold: 150.00
  461. E.W. Carpenter, Lancaster, ¾” side bead molding plane, G+-Vg Sold: 25.00
  462. 5 – Various wooden simple molding planes, G+-Vg. Makers include: A. Bramley; Union Factory, H. Chapman; Greenfield Tool Co; A. & E. Baldwin, N. York; Sandusky Tool Co. Sold: 35.00
  463. 2 – Wooden handled screw arm plow planes: J.E. & G.M. Lindsey (Huntington, MA., 1856-1879), G+; Union Factory, H. Chapin, #238, G Sold: 22.50
  464. 2 – Wooden screw arm panel grooving planes: P. Chapin, Baltimore, missing stop nuts, G; Union Factory, H. Chapin, Baltimore, G Sold: 7.50
  465. Group of 4 – tools: wooden axe handle pattern, G.; assembled 3pc. slating tool set: zaxe, Vg; break & ripping tool, F+-G Sold: 20.00
  466. Stanley #45 combination molding plane, appears complete w/ original box & cutters, Vg-Vg+ Sold: 170.00
  467. 13 – Assorted implement wrenches, F-G+. Makers include: Barcalo; Cat.; Case; I.H. (International Harvester); Rasco; Lectrolite Corp.; Iowa Cream separator; etc. Sold: 22.50
  468. Haran Saw Corp. 24” butcher’s saw, Vg Sold: 5.00
  469. 7 – Assorted wrench & pliers type tools, F-G+ (look at pictures): Herter’s #11 fly-tying vise; Whitcher; Ken Tool Co. G17, multi-wrench; etc. Sold: 17.50
  470. 4 – Various combination wrench/tools: Wm. Hjorth & Co., Jamestown, Ny. pat. 9-8-1903, “Lightning Combination Wrench/pliers, Vg; W.J. Dadd, New York, #77, Vg; “Handy” #3, combination tool, G; Bowker & Tripp, pat. 5-22-1877, dbl.-jaw buggy wrench, G Sold: 22.50
  471. Millers Falls #8C bench jack, NIB Sold: 45.00
  472. Koeth’s Kombination Kit w/ original wooden tool chest, “K.K.K. Tool Co.” patent 7-2-1900, Vg. Sold: 90.00
  473. 8 – Assorted “Bicycle-pocket” adjustable wrenches, F-G+. Makers include: Billings & Spencer; Barcalo; Barnes Tool Co; “Diamond”; etc. Sold: 35.00
  474. 14 – Assorted combination or multi-wrenches, G-G+. Makers include: Paasche; Mussselman Universal Bicycle wrench; Binks Mfg. Co; Maytag; Glenwood; etc. Sold: 25.00
  475. Tray lot assorted tools: Billings & Spencer “ratchet socket wrench set” w/ wooden tool chest, G+; 2 – Stanley small try squares, Vg; 4 – assorted wooden handled screwdrivers, G-G+ Sold: 40.00
  476. 5 – Various hammers, G-Vg: 3 – millstone hammers (1 – signed, Plumb); 2 – claw hammers: Stanley: #40-28oz. w/ round poll; 28oz. w/ octagon poll Sold: 75.00
  477. Stanley Bailey (?) #7 bench jointer, F-G. w/ Bailey patent marked chip guard. The plane deck is unmarked & blade is unmarked Sold: 100.00
  478. 8 – Assorted “Bicycle-pocket” adjustable wrenches, G-G+. Makers include: Iver Johnson; Billing & Spencer #97; Mossberg #A-2; Union #1; Wakefield Cycle Wrench; etc. Sold: 45.00
  479. 9 – Assorted combination/multi-wrenches, G-Vg. Makers include: Franklin Metal & Rubber Co. “Spud Wrench”; Electrician’s utility tool; “Never-slip”; Bendix Products Corp.; Bonney Crocodile; etc. Sold: 15.00
  480. 8 – Assorted adjustable wrenches, G-Vg. Makers include: Wescott; Barcalo; B&C; Penen’s Corp. Sold: 22.50
  481. 10 – Assorted combination or specialty wrenches, F-Vg. Makers include: Anchor steel strapping; Champion Brass; Fast’s Coupling; IH; Fits All; Acme; etc. Sold: 15.00
  482. 8 – Assorted adjustable wrenches, G-Vg: Pexto, 15”; Stillson 10” pipe wrench; Coe’s Wrench Co.: 10” & 8 ½”; Moore’s; P.S. & W Co.: 8”, 12”; I.H. Sold: 30.00
  483. 10 – Assorted adjustable wrenches, G-G+. Makers include: Trimo; B&C; Pexto; Billings & Spencer; Westcott; Klein Tools Inc. Sold: 22.50
  484. 10 – Assorted pliers or combination type tools, F-Vg: Eifel Geared Pliers-wrench; “Kant-slip”; W. Wiliman; Lightolier Co., Chain Pliers; Eagle Jaw #301; Hamlet; etc. Sold: 22.50
  485. Hess, patent applied for, Manufactured by Lancaster Fdry. Co. screw-operated spreader jack, G. Sold: 5.00
  486. 7 – Wooden molding planes, various forms (look for yourself), G. Makers include: Auburn Tool Co.; 2 - Sandusky Tool Co. two-iron; Field & Hardie Co.; A. & E Baldwin; Greenfield Tool Co Sold: 40.00
  487. White Mountain Freezer, 6qt. hand crank ice cream freezer. The freezer has green painted cask, F+-G (lowest band is missing) Sold: 22.50
  488. Wm. Ainsworth & Sons Inc. Type BT, chemist’s metal & glass cabinet scales, G-VG Sold: 15.00
  489. 5 – Assorted wooden molding planes, G-Vg: Mathieson & Son, grooving plane w/ adjustable sole mounted fence; John Moseley & Son, grooving plane w/ adjustable sole mounted fence; Mathieson & Son, adjustable fillister plane; Greenfield Tool Co., panel tongue plane; 3 – round planes, Makers: Barry & Way; 2 – Shiverick Sold: 65.00
  490. 6 – Assorted wooden reverse ogee w/ bevel molding planes, G-Vg. Makers include: Moon, London; Mathieson & Son; Carrick & Craig, Glasgow; Way & Sherman, New York (1849-52, two-star rated rarity); W. Laurie; J.W. Harron, 208 Bleecker St. (1863-1917) Sold: 70.00
  491. 4 – Lg. Wooden molding planes: Union Factory, Chapin-Stephens, #160-1 ¾” X 16” handled jack rabbet plane, missing one knick blade; Union Factory, Chapin-Stephens, #159-1 ½” off-set handle jack rabbet, Vg; Union Factory, Chapin-Stephens, #159- 1 ¼” off-set handle jack rabbet, G+; Josiah King, Bowery, New York, field raising plane, missing adjustable sole fence, G Sold: 25.00
  492. 6 – Assorted try or mitre squares w/ rosewood & brass handles, G-Vg: David Flather, Solly Works, 4 ½”; Smallwood #535-4 ½”; Stanley #20-6”; Stanley R&L #20-6”, early generation; Marshall Wells, pat. 4-27-1909, 7 ½” mitre square, Vg; Stanley R&L #2-7 ½” mitre square, G= Sold: 45.00
  493. 5 – Various tools: hand wrought brick hammer; Stanley 12oz. claw hammer, G; Germantown, lathing hatchet, G.; Nicholson #150 dbl.-head joiner’s mallet; small hand wrought tack claw hammer, G. Sold: 40.00
  494. Germantown, full side broad hatchet w/ upper & lower lugs, G+. The hatchet has chamfered edges. (chip from butt) Sold: 30.00
  495. 6 – Assorted socket handle timber framer’s chisels, 1”-2” wide, G-Vg. Makers include: Witherby; Union Hardware Co.; etc. Sold: 130.00
  496. 3 – Drilling devices: 2 – Hollow auger braces: Millers Falls 14” brace w/ adjustable hollow auger, Vg.; Goodell-Pratt Co. adjustable hollow auger on 14” brace, G+-Vg; small T-handle tap reamer, G Sold: 45.00
  497. 4 – Various handsaws: Sargent & Co. 12” mitre backsaw, G+; Stanley 12” compass saw, Vg+; 6” stair builder’s saw, G; 10” turned handle dovetail saw, F Sold: 15.00
  498. 5 – Various brass tools: 3 – Plumb bobs: small 3oz. top shape w/ steel tip, Vg; General Hardware Co. 24oz. steel tip, G+; K&E 16oz. steel tip. G; hand operated air pump, Vg; Chatillon 15lb. spring scales Sold: 45.00
  499. Tray lot assorted drilling or screwdriver tools: 3 – various spiral operated screwdrivers; Enterprise “The Best” T-handle bung cutter; cast iron, Pat. 3-19-1867, tool handle, G; turned oak drill bit index; etc. Sold: 7.50
  500. 8 – Assorted length Stanley #312 aluminum handle try squares, G-Vg Sold: 160.00
  501. 2 – Wooden folding tailor’s squares: Kellogg, French Tailor System, pat. 12-31-1920, Vg; unsigned, patent Aug.4th, Vg Sold: 5.00
  502. 3 – Various collapsible frame squares: Kellogg French Tailor system, F; Magee, Worrall & Richardson, pat. 5-26-1885, damaged F.; Twix Mfg. pat. # 2512177 knock-down framing square, G-G+ (missing set pin) Sold: 10.00
  503. Tray lot assorted measuring devices: unsigned 20” mahogany panel marking gauge, G+; Mohnton Lumber Co. 12” wooden advertising level, Vg; unsigned combination square, Vg; Stanley #46-101 center-square, Vg; Stanley “sweetheart” #38 ½-4” machine level, G; etc. Sold: 10.00
  504. Tray lot assorted measuring devices: inside & outside calipers; executive & pocket steel rules; proportional dividers; German sliding calipers; etc. Sold: 17.50
  505. 14 – Assorted socket handle firmer, butt & bench chisels, G-Vg. Makers include: Jennings & Griffin #6; Witherby; Buck Bros.; Union Hardware; etc. Sold: 80.00
  506. 4 – Various large try squares w/ brass & wood handles, F-Vg: S.S. Gansey, 17 ½” w/ 5 – brass diamond rivet plates; 3 – unsigned, 17 ½”-18” Sold: 25.00
  507. 6 – Assorted wooden bench planes: Gage Tool Co. #G26 transitional fore plane, G; 3 – coffin shape block planes: J. Kellogg, 9”, Vg; S. Hastings, Amherst, MS. (3-star rarity), 9”, F; Union Factory, H. Chapin, 9” Vg; 2 – horned blocks, G: Sandusky Tool Co.; JPBO, 1 ½” Sold: 35.00
  508. 12 – Assorted gouge chisels, G-Vg.: 3 – front bent carving gouges; Buck Bros. bent shank gouge; 7 – assorted firmer gouges. (most Buck Bros.) Sold: 70.00
  509. *Restorer’s lot: 2 – Wooden handled screw arm plow planes: P.A. Gladwin & Co. rosewood frame & fence w/ fruitwood threads, stops & knob (1 – screw damaged & missing 1 – knob); A. Mathieson & Son, w/ boxwood threads, knobs & stop wafers, chip from ear of handle, G. Sold: 10.00
  510. 2 – Wooden handled screw arm plow planes: Auburn Tool Co. #90, F-G.; William Way, N. York, F.-F+ Sold: 35.00
  511. 6 – Firmer chisels: 4 – Erik Anton-Berg, Sweden, bench chisel set, G-G+; Isaac Greaves ¼” socket mortise, G+; ¼” unsigned, G Sold: 90.00
  512. Assembled graduated set of 7 – firmer gouge chisels, G+-Vg. Makers include: Buck Bros.; Marples & Son; Ibbotson; etc. Sold: 95.00
  513. 3 – Wooden wedge/slide-arm molding planes: McGlashan, brass tipped arm sash fillister, F+-G; T. Butts, brass tipped arm sash fillister, G; signed (?) brass tipped arm plow plane, arm stop converted by owner to use wooden stop screws, refinished G-G+ Sold: 25.00
  514. 6 – Various wooden complex molding planes, G-Vg. Various cuts, makers include: Israel White; A. Kelly & Co., Ashfield, Mass.; Darby & Cox; J.L.W.; B. Frogatt; John Veit, Phila. Sold: 60.00
  515. 8 – Assorted firmer gouge chisels, F+-G+. Makers include: J.T. & H.A. Pratt; Ja. Swan & Co.; W. Butcher; Buck Bros.; Witherby; etc. Sold: 95.00
  516. 2 – Wooden screw arm plow planes: Mosely & Son, w/ Palmer & Co., Brighton, on tail, G+-Vg (missing original wedge). The plane has fancy brass side sight on depth adjuster; J. Kellogg, Amherst, MS. boxwood body, threads, knobs & stop wafers, Vg Sold: 25.00
  517. 3 – Millers Falls #1 hollow auger braces, G-Vg. (2 – complete) Sold: 75.00
  518. 4 – Various hand drills: North Bros. “Yankee” #1530A-X, Vg; Stanley #624, Vg; Millers Falls #980, G+; Miller Falls #2, F Sold: 22.50
  519. Tray lot assorted tools: lathe two-part parting chisels, Vg; assorted awls; burnishing tools; edge round; ratchet screwdrivers; etc. Sold: 25.00
  520. 5 – Various block planes: Craftsman #619,3732 low angle, G+; Craftsman BL low angle, G+; Sargent 7” low angle, G+; Millers Falls #16, replaced iron, G+; Sargent & Co. 5 3/8”, G. Sold: 30.00
  521. 2 – Millers Falls breast drills: #120B, G-G+; #12 w/ level, G. Sold: 20.00
  522. Tray lot assorted combination square parts: 3 – 12” rules; 2 – compass gauges; 1 – center square; 2 – combination mitre squares; etc. Sold: 40.00
  523. 2 – Panel marking gauges: unsigned, 20” mahogany wedge arm, G+; unsigned, 16” w/ screw stop on arch top fence, Vg Sold: 17.50
  524. 2 – Measuring devices: Unsigned, rosewood 20” w/ brass edged fence that has brass screw stop. The rail has brass sole under marking pin, Vg; Keen Kutter #KK 104-15 ¾” cherry wood level, Vg Sold: 22.50
  525. 5 – Assorted “egg beater” hand drills, G-Vg: 2 - “Yankee” #1530A; Mohawk, Shelburne; Millers Falls #2; etc. Sold: 12.50
  526. 3 – Various infill squares: A.V. Carter (??), 12” brass framed handle w/ ebony? Infill, Vg+; unsigned 12”, w/ steel frame & rosewood infill, multiple owner strikes, Edward Ware, G; Stanley R&L, 13 ½” mitre square, G+ Sold: 45.00
  527. 14 – Assorted chisels, G-Vg. The chisels include firmer, bench, butt, etc. Makers include: Sargent; Buck Bros.; Jordan; Worth; etc. Sold: 60.00
  528. 10 – Assorted block planes, F-G. (various types) Makers include: Sargent; Ohio Tool Co; etc. Sold: 50.00
  529. 5 – Various measuring devices: Stanley R&L, 4” rosewood infill steel handle try square, G.; unmarked Stanley #68 mortise gauge, Vg; Stanley #91 dbl.-arm marking gauge, Vg; Stanley #90 single arm marking gauge, G; Eagle 6” flush-T bevel square, F Sold: 17.50
  530. 13 – Assorted chisels, G-Vg. Various types: firmer gouges, firmer straight, socket mortise, bench, etc. Makers include: Buck Bros.; W. Butcher; Sargent; Stanley; etc. Sold: 55.00
  531. 3 – Various North Bros. “Yankee” machinist bench vises, G-G+: 2 - #1993; 1 - #1992 Sold: 90.00
  532. 4 – Various primitives/tools: Western Electric #127E oak case telephone ringer box, Vg; P.S. & W. Co., brass front spring scales, G; Ideal #180, mini-ball casting mold, G+; Lignum Vitae barrel head wooden mallet, G-G+ Sold: 22.50
  533. 5 – Various small/mini-tools: Billings, pat. 2-4-1896, slide-out multi-screwdriver, G; Exacto #035 aluminum handle saw; Simplex “Jack in the Box” bottle jack, NIB; mahogany frame router, Vg; AMT brass round smoothing plane, E Sold: 22.50
  534. 9 – Assorted vintage tool catalogs: 2 – Browne & Sharpe #33, G-Vg; 1 – Browne & Sharpe #34, Vg; 4 – Starrett #26 w/ various trade adv. on cover, G-G+; Gurley’s Manual, 34th edition; Williams & Co., 21st edition, Vg Sold: 40.00
  535. 7 – Various calipers & precision tools: Goodell-Pratt Co. depth micrometer; pr. Browne & Sharpe #812-6” inside & outside calipers w/ original box; pr. 12” locking inside & outside calipers; 7” divider/compass; Browne & Sharpe #821-6” stiff-joint, G Sold: 20.00
  536. 4 – Various squares: Topp’s framing tool, combination bevel/square, F+-G; 3 – rosewood & brass handled try squares, G-Vg: Hawesworth, Sheffield, 12”; Stanley #20-15”; unsigned, 12” Sold: 22.50
  537. Tray lot assorted combination squares, square parts; & machinist made try squares Sold: 12.50
  538. 6 – Various wooden side bead molding planes, G+-Vg. Makers include: A.&E. Baldwin w/ owner strike A.C. Baldwin; J.W. Gibb, N. York; Hendrik; William Ward; Mockridge , Newark, NJ Sold: 25.00
  539. Early Stanley #45 combination molding plane w/ embossed floral casting. The plane has short rods, skate, fence & only 1 blade, G+ Sold: 25.00
  540. Sargent combination molding plane, G+-Vg. The plane has no blades, but fairly complete. Sold: 45.00
  541. 9 – Assorted wooden molding planes, G-Vg. (various cuts). Makers include: J. Denison; S. Cook, N. Brunswick, NJ; J. Lovell, Cummington, Mass. (*interesting note – the maker died in accident at his factory); L. & I.J. White, Buffalo; T. Tileston, Boston; Winsted Plane Co; T. Hill Sold: 70.00
  542. 2 – Wooden screw arm plow planes: Sherman Bros., New York, handled plow w/ long threads; knobs & stops. The plane has 6 cutters, G-G+;  Greenfield Tool Co. #510, front thread is busted, F-G Sold: 40.00
  543. 9 – Assorted wooden bead/side bead molding planes, F-Vg. Makers include: Sandusky Tool Co; Stothert, Bath; Bewly (New York); A.E. Baldwin; J.W. Gibbs; G.W. Denison & Co.; Auburn Tool Co; Union Factory, H. Chapin Sold: 25.00
  544. 6 – Various wooden joinery planes, G-Vg: A. Mathieson & Son, adjustable grooving; John Moseley & Son, London, moving fillister w/ full dovetailed boxing; Greenfield Tool Co., skew rabbet; match pr. Denison & Co. tongue & groove plane set; etc. Sold: 40.00
  545. 3 – Handsaws: Geo. Bishop & Co. #7-26 ¼”-7pt., Vg; Disston & Sons, #8-26” w/ nib & lg. brass button, G-G+; Atkins #58-10pt. straight-back, G-G+ Sold: 7.50
  546. 3 – Disston & Sons, handsaws: #D8-26”-5pt. sway-back w/ finger hole handle, G+-Vg; #D42-26” “Victory” model w/ Eagle & Liberty Bell graphics, G-Vg; #D12-26”-10pt., G-Vg Sold: 70.00
  547. 13 – Vol. Audels Guides: 4-vol. set of Mason’s and Builder’s Guide; 2 – 4 vol. sets Carpenter’s and Builder’s Guide Sold: 7.50
  548. Lot assorted tool catalogs: Pratt & Whitney, Small Tools; Starrett Tools: 2 –#25; #26; #27; Royle Tubing & Insulating Machines; many Lufkin Tools; etc. Sold: 10.00
  549. 12 – Assorted Audels Guides: 4 – vol. red bound set, Masons and Builders Guide; 2 – 4 vol. sets, Carpenter’s & Builder’s Guide Sold: 10.00
  550. 6 – Assorted wooden complex molding planes (various cuts), G-Vg. Makers include: Varvill & Sons, York; Kaye, Nottingham; Stothert; Blizard; etc. Sold: 40.00
  551. 9 – Assorted wooden molding planes, G-G+: Miguel Cabo(?), Buenos Aires, hardwood block; 8 – assorted simple or complex molding planes. Makers: Goldsmith, Phila; W.B. Belch, New York; Philipson; S.E. Farran, Newark, NJ; Jo. Fuller; etc. Sold: 40.00
  552. 8 – Assorted wooden molding planes (various cuts), F-G+. Makers include: Ohio Tool Co.; Barry & Way, New York; Spence & King; T. Shepard; J.D.; etc. Sold: 25.00
  553. 7 – Assorted wooden molding planes, various cuts, G-Vg. Makers include: J.J. Watson’s; Blizard; R.S. McAuley; J. Carnegie; J. Wilson; etc. Sold: 22.50
  554. Tray lot assorted tools & primitives: 2 – wrought iron T- handle bale hooks; hand wrought single handle “Hog” scorp; set of graduated size dbl.-head metal forming balls; etc. Sold: 5.00
  555. 5 – Assorted tools: “Yankee” #1555 breast drill, Vg (missing knob); Millers Falls #2 hand drill, Vg; 1 ½” T-handle auger, Vg; 2 – small handsaws Sold: 30.00
  556. 3 – Sargent metal planes: #718-18” self-adjusting bench jointer, G+-Vg; #33 dado plane, G-G+; #600 4-edge blade, Vg Sold: 40.00
  557. 2 – Stanley #45 combination molding planes, G-G+. Neither plane has any blades, but both have skates, small rods & fences Sold: 35.00

Back to Top


Catalog Reference Codes

E

Excellent condition

Nearly new condition with original finish and no noted damage.

VG

Very Good condition

Small cracks in wooden parts, no repairs.  Has minor loss to original finish. Ideal for collector’s or display purpose.

G

Good condition

Minor cracks in wood parts, repairs may be needed for use, has substantial paint or finish loss. Minor rust damage on iron planes & tools.  Ideal for users or those wishing to refurbish for collection. 

F

Fair condition

Substantial cracks to wooden or metal parts.  Most parts still intact, but may have had substantial repair or replaced parts.  Major rust damage.  Needs attention or repair prior to use. Good for parts.

P

Poor condition

Major damage or altered pieces. Has deep pitted rusting to iron & metal pieces.  Good for parts use only, or major repair work.

 

Cataloger’s note: This list is a guide that contains our description of each piece.  We used several tool references, guides and years of experience handling these tools to create these descriptions.  However, many pieces are hand wrought for a particular purpose and no reference to their use exists.

Rarity” is a very difficult attribute to determine, but we considered how often these pieces have come across our auction block in the past several years to make that distinction.  This may not always be in agreement with all price or collector guides.

The conditional reference was done in a fashion that we felt described the quality or condition of each piece.  Please refer to the chart above.

Absentee bids:  We strongly recommend that anyone wishing to place an absentee bid examine the item in person first.  If you choose to place an absentee bid based on the description in the catalog alone, without examining the item personally, you do so at your own risk. The tools are described in an as found condition. You are the final judge. NO RETURNS WILL BE ACCEPTED.

Anyone wishing to place a bid with our auction firm must have either personally examined the tools during the preview times, or have made prior contact with our office staff at Horst Auction Center, (717) 738-3080.